Super Jet JIG SAW BUILD rated R for graphic violence and sexual content. Viewer discretion.

[TheCoz43]

My buddy gave me a complete stock SN hull, missing a carb, but had an ac racing handle pole and a top loader. Motor was frozen, so I decided to tear it down.





I first rockered the nose, and cut 3 1/2 off the back of the ski. I shaped and made tubbies. Put a front foothold in through the motor compartment. Cut the hood down. Moved the steering forward 6". Lowered and widened the tray. Molded adjustable footholds. Put together a nice motor. And more.

 

[TheCoz43]

I cut a bunch of slices and pulled the nose up with wire and wedges. Then I pulled the sides back together by twisting up wire. Then re glassed it back togehter.

 

[TheCoz43]

I cut 3 1/2 inches off the back and then re attached the end pieces. I also lowered the deck to the top of the pump.

 

[TheCoz43]

Cut off the hood almost flush with center. New breather inside pole.

 

[TheCoz43]

Filled rear tray up tight with styrene foam and glassed in. Side rails have 1/2 foam. first layer of glass connects from wall to inside wall to inside wall.

 

[TheCoz43]

Made a mold of Stanton's Footrocket footholds. Then put a layer of carbon over the top. Then I cut out a rectangle where I expect it to mount and poured resin and microballoons into the side rail to make it solid. Then glassed that back in. This way I can move the footholds around after installation, and no way for water to get in.

 

[TheCoz43]

Shapped and made tubbies out ridgid foam. Glued on and glassed in. Extended tray forward into motor cavity 2 1/2". Molded pocket for front foot.

 

[TheCoz43]

Moved steering forward 6".

.

Filled bond line with microballoons. Added more glass to sides for strength.

 

[TheCoz43]

Primered and first paint color which i didntlike and repainted.

 

[VXSXH20]

Super Dope, Hats off to you man! interesting to see how it rides with the rocker and tubbies, is this a surf boat?

 

[TheCoz43]

Yes, surf boat. thank you, I got tired last night, but I will post more better pics when I get time.

 

[4SeasonsPower]

Great work.

 

[JetManiac]

Wow, that was a lot of work! Hull looks nice now.

 

[MCrider]

Wow....a lot of nice builds blowing up lately. The work you guys do with sn hulls looks as good if not better then some am hulls!

 

[swapmeet]

Crazy build! Really nice work, pretty much what MCrider said, amazing what folks are doing with squares....


Is that the stock pole? Are you keeping it or changing to a RN pole?

 

[iangdesign]

I was curious about the pole as well. I have an AC pole on my square and curious about cutting it down. Sub'd!

This really makes me wanna start chopping on my 300.

 

[Honda118]

Great job

 

[loictahiti]

+1 Great job

Subscribed right now

 

[TheCoz43]

Thank you for comments, It is an AC racing pole I thought about cutting it -3" for a while, but moving everything forward seemed better for the handling of the ski. I did make a custom bracket for it that lowers the profile where it mounts. I dont like the copper color, I think I am going to paint it orange tonight. That was the original plan.

 

[TheCoz43]

In the last picture you can see the two burn marks where I tried at first to use heat to make the rocker, but I didn't want it to have a 3 stage rocker so I cut slices instead. I left the last 1" atached so that i would bend but still stay together.