N3vrSat1sfied
Military Member
- Location
- Fort Worth, TX
2013 EME Q8 Sky
I picked it up yesterday.
-So first off my experience with EME and Eric was great! my hull took a little longer as we did a custom gel coat color, but I knew that ahead of time and was worth the wait. Eric kept me in the loop from day 1 to the day I picked it up. If I had a question he got back to me in a timely manner. The Ski looks great, the turf looks great, and I'm super excited. Eric even took extra time to throw a mock up engine in the ski and make sure I knew how to make sure my alignment is good. Also, when I went to pic my ski up, I arrived about an hour ahead of schedule. Eric was not at the shop at the time so he arranged for Ryan to meet up with me and EME treated me to lunch before meeting up at the shop! That's customer service. Since purchase I can still contact Eric with any build question and he promptly responds.
Overall, I am super happy with the ski and EME!
Hull:
-2013 EME Q8 Sky
-Gel coat: Top: Mopar Orange crush bottom: black
-EME/X-Metal Frankenstein Scupper
-Jaz Fuel Cell
Engine & Electronics:
-Team Scream SS865 on first bore (827)
-MSD enhancer
-Complete JSS Electronics/ebox/wiring
-TBM Flywheel
-MagnaPower EXT9
-Bpipe Mod, Bored and Port Matched by Team Scream
-Ski innovations waterbox
- Team Scream Modified 46mm carbs (117.5 High, 125 low, 2.0 needle, 65 gram spring, 60 return jet, 3/4 out on H, 1 1/2 out Low)
-ADA black throttle wheel
-Prok F/A's
-Boyseen Intake
-Carbon reeds
Pump & Handling:
-Skat145 mag
-EME skat trim (86mm Reduction nozzle, 89 steering)
-11/17 skat impeller
-650sx driveshaft
-ADA couplers
-Skat SXR intake grate
Steering and Pole:
-RRP pole (3m carbon wrap)
-EME bracket with dual breather hose
-RRP bearing steering
-RRP straight bars
-UMI throttle
-Skat EME trim lever
-ODI ruffin grips
-Blowsion ODI orange lock rings
-Yamaha Throttle cable
-SXR steering cable
Some of you might recognize the color.... Mopar: Crush
I picked it up yesterday.
-So first off my experience with EME and Eric was great! my hull took a little longer as we did a custom gel coat color, but I knew that ahead of time and was worth the wait. Eric kept me in the loop from day 1 to the day I picked it up. If I had a question he got back to me in a timely manner. The Ski looks great, the turf looks great, and I'm super excited. Eric even took extra time to throw a mock up engine in the ski and make sure I knew how to make sure my alignment is good. Also, when I went to pic my ski up, I arrived about an hour ahead of schedule. Eric was not at the shop at the time so he arranged for Ryan to meet up with me and EME treated me to lunch before meeting up at the shop! That's customer service. Since purchase I can still contact Eric with any build question and he promptly responds.
Overall, I am super happy with the ski and EME!
Hull:
-2013 EME Q8 Sky
-Gel coat: Top: Mopar Orange crush bottom: black
-EME/X-Metal Frankenstein Scupper
-Jaz Fuel Cell
Engine & Electronics:
-Team Scream SS865 on first bore (827)
-MSD enhancer
-Complete JSS Electronics/ebox/wiring
-TBM Flywheel
-MagnaPower EXT9
-Bpipe Mod, Bored and Port Matched by Team Scream
-Ski innovations waterbox
- Team Scream Modified 46mm carbs (117.5 High, 125 low, 2.0 needle, 65 gram spring, 60 return jet, 3/4 out on H, 1 1/2 out Low)
-ADA black throttle wheel
-Prok F/A's
-Boyseen Intake
-Carbon reeds
Pump & Handling:
-Skat145 mag
-EME skat trim (86mm Reduction nozzle, 89 steering)
-11/17 skat impeller
-650sx driveshaft
-ADA couplers
-Skat SXR intake grate
Steering and Pole:
-RRP pole (3m carbon wrap)
-EME bracket with dual breather hose
-RRP bearing steering
-RRP straight bars
-UMI throttle
-Skat EME trim lever
-ODI ruffin grips
-Blowsion ODI orange lock rings
-Yamaha Throttle cable
-SXR steering cable
Some of you might recognize the color.... Mopar: Crush
Attachments
Last edited:
