Other Paul (Superjet3) 247-version 2.0

[PancakePete]

looks like barnacles on the exaust tube!!!!!!!! i jjust got done reenforcing a old 24/7 hull that they did in carbon.. all the carbon i pulled off from delamination....fn rookies

I said those were barnacles too, paul said it wasnt..
I think they were though !:fart:

 

[shawn_NJ]

The blue foam is way too funny.

 

[Flash-FX]

Oh boy...sorry to see your boat's true colors. That blue foam looks like divinycell scraps the guy swept off the floor. At first glance, the pisser lines looked like foot longs stuffed in there. Ha Ha!

With all those fractures in the surface glass, you might consider giving the whole boat a layer or two of 4oz surfboard cloth & epoxy to seal it up. Paint will just crack again and look like crap after the first outing.

 

[Superjet3]

Well I decided to keep the 08 hull so here is the fixing process. Ground alot of the out. and filled the bondline with West Systems and 406. Then I layered 2 layers of 7.5 oz carbon. I am going to let that dry and see how strong it is. I also filled all the existing holes to re-do them.. The midshaft housing was mounted to far to the port side. Thanks Mark!..

 

[shawn_NJ]

Nice work man. How was that carbon I got ya to work with?

 

[Superjet3]

Nice work man. How was that carbon I got ya to work with?

Carbon was great. No problems with it at all. Do you want me to order you some to replace what I am using? I may need to order some resin and foam.

 

[shawn_NJ]

that, use as much as you need. Dont worry bout it. I just bought it to have some around....LOL

oh ya. I have 8 gallons of west if you need some of that.

 

[PancakePete]

nice work Paul !

 

[snowxr]

Damn Mark was on crack when he built hulls. And he made jokes about XFT putting pop bottles in hulls! Must have thought packing peanuts were the wave of the future....

 

[vitalikol]

Fixing somebodes f**kups --it's f**ken mess, I'm hate f**kers who pretend to know what thay doing. WTF

 

[Superjet3]

I figured I should get working on the ski if I plan on riding at all this season. The bulkhead is all done and I got the midshaft mounted. Need to do all the lines next and then foam.

 

[Superjet3]

More Pictures of Progress

I did some more on it tonight. I think I will foam tomorrow.

 

[PancakePete]

Nice work Paul.. I will swing by later after radar to check it out.:fing02:

 

[CarFanatic]

damn, how you going to recreate that tray? I know nothing about blending fiberglass in

 

[Superjet3]

I am going to pour foam and then shape it.

 

[HBCwatercraft]

A shame that needs to be done to this hull. To bad it wasnt done right the first time.

 

[HBCwatercraft]

The rebuild is lookin good though.

 

[CarFanatic]

ah, then you lay the glass over the foam

 

[Superjet3]

Poured some foam but ran out. (More will be here next week) I also laid up some carbon foot holds. I am debating whether or not to shave down the rails similar to a WCF hull.

 

[Superjet3]

More progress pics