Pole bracket conversion
- Thread starter big al
- Start date
- Location
- Oregon City Oregon
AM to OEM RN are same width, got a RMJS on mine, it is nice just missing a pole lock like the HSI has but you'll have to buy a special pole lock for kp pole.
Last edited:
john zigler
Vendor Account
- Location
- wisconsin
Our original RCJS Pole bracket in stock here. Works with your stock SN pole bolt;
watcon.com
Handle Pole Conversion Bracket
This is our Original, WATCON handle pole mount conversion bracket. It allows you to run a 1996- later Round Nose Super Jet pole, stock or aftermarket on an earlier 1990-1995 Square nose SJ. Ours uses the SN pole bolt, no need to purchase anything extra hardware. Accept NO copy's! Part...
watcon.com
- Location
- mobile alabama
Does your lock work w the hazard bracket ?Our original RCJS Pole bracket in stock here. Works with your stock SN pole bolt;
Handle Pole Conversion Bracket
This is our Original, WATCON handle pole mount conversion bracket. It allows you to run a 1996- later Round Nose Super Jet pole, stock or aftermarket on an earlier 1990-1995 Square nose SJ. Ours uses the SN pole bolt, no need to purchase anything extra hardware. Accept NO copy's! Part...
john zigler
Vendor Account
- Location
- wisconsin
Our bracket is not a "hazzard" bracket. That is a member here....
With a RN pole, the stock pole lock does not work, if that is your question.
But will it work with a KP pole?Our original RCJS Pole bracket in stock here. Works with your stock SN pole bolt;
Handle Pole Conversion Bracket
This is our Original, WATCON handle pole mount conversion bracket. It allows you to run a 1996- later Round Nose Super Jet pole, stock or aftermarket on an earlier 1990-1995 Square nose SJ. Ours uses the SN pole bolt, no need to purchase anything extra hardware. Accept NO copy's! Part...
- Location
- mobile alabama
My mistake , I thought this was something that bolted onto the bracket ?
john zigler
Vendor Account
- Location
- wisconsin
We use either OEM or RRP poles when we do conversions here. I am not familiar with the KP poles. It should work as long as they are a std RN pole dimension where they mount.
john zigler
Vendor Account
- Location
- wisconsin
I think the KP is an RRP copy. On an RRP we use a std RN pole spring. I have used a SN spring. We cut the ends off, and run it upside down. I have springs in stock as well.