SB Products Billet SuperJet engine case

[wsuwrhr]

Thanks for the kind words, I know many of you guys dig the billet pictures.

We'll see, I will have to ask "approval" to do that, since it isn't "my" ski.

Posting pic's take up alot of time. That is why I don't do it very often.
Formatting, sizing, uploading, posting. All the while, the phone is ringing, machines need attention, ect.

DASA has many employees, but I am sure not everyone knows
SB Products is just a one-man-shop, ME. I wish I could afford an employee.

I will try, I won't promise, but I'll try.

Deal?

Brian

This is good news-BUT-we request pics and a build thread in the ski build section once it gets started!!! Pics of the SB Products cases is like free Viagra for everyone on the X!!!

 

[wsuwrhr]

Alright peeps,

Headed out the door to go home, spent all day at the shop making sure I can afford to stay here another month, haha.

So much for making a profit, I am just trying to pay bills!!!

Be back tommorow I am sure.

Brian

 

[GIL]

Thanks for the kind words, I know many of you guys dig the billet pictures.

We'll see, I will have to ask "approval" to do that, since it isn't "my" ski.

Posting pic's take up alot of time. That is why I don't do it very often.
Formatting, sizing, uploading, posting. All the while, the phone is ringing, machines need attention, ect.

DASA has many employees, but I am sure not everyone knows
SB Products is just a one-man-shop, ME. I wish I could afford an employee. u can, ME ME ME ME ME ME ME ME ME ME ME ME ME lol. U don't even have to gimme a check!!! I will work for parts!!! lol I have a buddy that has a Citation that got us 1/2 way across the country in 2 hours, so surely he can get me to your shop in 4 hours 1 way. Lets see, he charges 1500.00 per hour in flight, so it will cost me 12,000.00 per day to get back and forth to work. That would have to be a new all time record. LOL

I will try, I won't promise, but I'll try.

Deal? thats fair enough!

Brian

...

 

[GIL]

Alright peeps,

Headed out the door to go home, spent all day at the shop making sure I can afford to stay here another month, haha.

So much for making a profit, I am just trying to pay bills!!!

Be back tommorow I am sure.

Brian

You keep bustin out the billet and you WILL be the next Dave Chapelle-

I'm rich beytch!! honk honk

 

[wsuwrhr]

Couldn't get away, posting from home....

Bustin' out the billet is the easy part, SELLING the busted out billet is the important part.

Brian

You keep bustin out the billet and you WILL be the next Dave Chapelle-

I'm rich beytch!! honk honk

 

[GIL]

Couldn't get away, posting from home....

Bustin' out the billet is the easy part, SELLING the busted out billet is the important part.

Brian

Once a couple of these bad boyz hit main stream US, they will be the new preferred powerplant! I am not familiar with your history, but lets face it, Dan has been a household name for big power plants for a long time. Now that Dan has your parts along with his, SB Products and DASA will surely continue to rock the pwc world for a long time to come.

Look at how many of the 7 port cast cylinders are out there-tons!!! Now that you have the billet cylinders w/matching cases and stroker options, people will come. Where else can you get cases to support big stroke cranks? NOWHERE!!!

 

[wsuwrhr]

I'm hopin' bud. i'm hopin'. I have about 30K invested in developing them.

Does anyone flip a Blaster in the surf? Flat water?

Will a GP based 1200cc be able to flip?

Inquiring minds want to know.

Brian

Once a couple of these bad boyz hit main stream US, they will be the new preferred powerplant! I am not familiar with your history, but lets face it, Dan has been a household name for big power plants for a long time. Now that Dan has your parts along with his, SB Products and DASA will surely continue to rock the pwc world for a long time to come.

Look at how many of the 7 port cast cylinders are out there-tons!!! Now that you have the billet cylinders w/matching cases and stroker options, people will come. Where else can you get cases to support big stroke cranks? NOWHERE!!!

 

[cambo au]

I'm hopin' bud. i'm hopin'. I have about 30K invested in developing them.

Does anyone flip a Blaster in the surf? Flat water?

Will a GP based 1200cc be able to flip?

Inquiring minds want to know.

Brian

a guy in my crew flips a stock as a rock blaster in the surf

 

[wsuwrhr]

a guy in my crew flips a stock as a rock blaster in the surf

Nice

 

[GIL]

a guy in my crew flips a stock as a rock blaster in the surf

Ausie nazis always showin out! lol jk u guys got some really good riders on your side of the pond!

 

[GIL]

I'm hopin' bud. i'm hopin'. I have about 30K invested in developing them.

Does anyone flip a Blaster in the surf? Flat water?

Will a GP based 1200cc be able to flip?

Inquiring minds want to know.

Brian

You will definitely need to call the other Brian in my sig! Thrust Innovations straight pull trim will be a must have for this venture!
This could be a movie worthy of a sequal-Brian and Brian flatwater flip a B1 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I am pretty dam sure there is not another engine builder that could make that claim!

 

[wsuwrhr]

I don't think you realize how LITTLE experience I have with operating PWC's. Kinda silly considering what I am doing.

I don't think I had flat water flips in mind on a possible custumers boat. Deciding on a motor package for him based on his wants and needs just had me thinking is all.

But I like where you are going with it.

Brian<---is no two stroke engine builder per se, I can do the job, but I can't make that claim. I am just a machinist.

You will definitely need to call the other Brian in my sig! Thrust Innovations straight pull trim will be a must have for this venture!
This could be a movie worthy of a sequal-Brian and Brian flatwater flip a B1 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I am pretty dam sure there is not another engine builder that could make that claim!

 

[Lucaumpits]

check thi out

 

[Lucaumpits]

 

[wsuwrhr]

check thi out
YouTube - Sebastian Inlet may 08 wave blaster backflip

Nice, looks easy. I figured it would be way more difficult than a standup

 

[wsuwrhr]

YouTube - Blaster Barrel Rolls

Now that looks harder.

 

[wsuwrhr]

Well, it is a done deal, after the past two days, after we put a pen to paper with a total he seemed like he was going to back out. Really seemed like it.

He called me up this morning all excited saying he was on his way to pick up the Blaster.

Two hours later he dropped it off. Gave me a few directions, let me know what he was interested in, I tried to go over a few things and he clearly wasn't interested in the details, told me knew about DASA and to just do a nice job. He wants a fast ski and left it at that.

Brian

 

[GIL]

Well, it is a done deal, after the past two days, after we put a pen to paper with a total he seemed like he was going to back out. Really seemed like it.

He called me up this morning all excited saying he was on his way to pick up the Blaster.

Two hours later he dropped it off. Gave me a few directions, let me know what he was interested in, I tired to go over a few things and he clearly wasn't interested in the details, told me knew about DASA and to just do a nice job. He wants a fast ski and left it at that.

Brian

AWESOME!!! I can't wait to see the build!

 

[GIL]

All right u tease, it's been 3 days now. No pics required yet, but u have to be stoked to be in a situation where u get to build a blaster and probaly test ride one of your engines!!! Are u done yet? JK Now quit reading this and get to work!!! lol

 

[wsuwrhr]

All right u tease, it's been 3 days now. No pics required yet, but u have to be stoked to be in a situation where u get to build a blaster and probaly test ride one of your engines!!! Are u done yet? JK Now quit reading this and get to work!!! lol

I am stoked. This opportunity was a good one for everyone involved.

You know we will be riding it...I mean testing it.

I have pics from the disassembly, but I haven't posted them yet. Haven't had a chance.

Brian