Hey guys! Although this is my first post, i have been watching this forum for a while now. So, anyway, I recently acquired a 95 SN Superjet from a friend. The ski hull is in great condition! But, being 14, I barely have much, if any mechanical experience... The ski has a Factory B pipe, a MSD enhancer, a Aluminum steering plate, and a few other mods. I began by trying to turn the ski over. Unfortunately, the wires from the MSD were all pulled, so I had to re-connect all the points. I used the manual from MSD itself, and a tutorial on this website. I found that the sheet I printed shows that the brown wire coming from the Start Stop switch, should go to ground, but if I do put it on ground, nothing happens. But if i attach it to a brown cable coming from the Enhancer, I hear a click, and what sounds like a motor trying to turn (a hum). Is this the way that the wires should be hooked up? So, thinking that the engine was seized, i began to disassemble the engine. I took off the head, to find the right cylinder completely rusted, while the left looked great. I tryed turning the crank by hand, and was able to move it a bit. Then i disassemble the cylinder. The coolant holes seem to have white baked on salt of some sort. I heard muriatic acid would work to remove this, does it? When i took the cylinder off the crank case, A whole lot of water went everywhere! Then, i was able to turn the crank! That was 2 days ago. Now, the crank is more than frozen. I believe that the water in there was acting as a lubricant. I later took off the flywheel cover, and found the only shiny thing in the engine. The gear appears to be in perfect condition! I really want to get this thing working, and i have about 500-700 to spend on it. I was later thinking tonight, that the engine would work if we simply rebored the cylinder, top crank case, and bought a new head, (is that all). Then, I plan on buying a crank with warranty from SBT, and new, big bore pistons. 1st would that work, second what bore should I go with?
Thanks Guys!!!
And i can get picks if you guys need them!!!
Thanks Guys!!!
And i can get picks if you guys need them!!!