silicone elbow for b-pipe to waterbox

[SurferSmurf]

found this on ebay. much cheaper than buying from thrust inovations. i just could not justify spending 60 plus shipping from thrust. it took me a bit to find the right size. thisis also the cheapest i found it at 36 bucks plus 6 for shipping.

 

[SurferSmurf]

sellers name is autogrimmig he has a store. that should make it easier to find.

 

[poopski]

Im gonna use one of these also, not from that seller but a similar one. I hope it works!

 

[Berky]

siliconestop.com it's not just for tits any more.

 

[Crab]

fifteen bucks on ebay.

http://cgi.ebay.com/ebaymotors/ws/e...0427126093&viewitem=&sspagename=STRK:MEWAX:IT

 

[Sanoman]

siliconestop.com it's not just for tits any more.

Nice comparison,Tem!

Also, http://www.siliconeintakes.com/ has a great selection.

 

[SurferSmurf]

fifteen bucks on ebay.

http://cgi.ebay.com/ebaymotors/ws/e...0427126093&viewitem=&sspagename=STRK:MEWAX:IT

not the right size. your waterbox is 2-3/8

 

[Sanoman]

not the right size. your waterbox is 2-3/8

These guys have a lot of diff combinations for their hoses.l bought two the other day.Nice stuff Smurf.

 

[Crab]

not the right size. your waterbox is 2-3/8

fits perfect I have installed a few.

 

[#ZERO]

You can find the 2" X 2-3/8" size if you search hard and make sure its 4-ply silicone so it will take the heat.

 

[Liquid Graffix]

Great find guys!

 

[Yami-Rider]

fifteen bucks on ebay.

http://cgi.ebay.com/ebaymotors/ws/e...0427126093&viewitem=&sspagename=STRK:MEWAX:IT

Do these hold up well? They look kinda cheaply made in the picture.

I just paid $55 for my new factory elbow

 

[THRUST]

keep in mind there is a big difference in these silicone elbows .

 

[THRUST]

found this on ebay. much cheaper than buying from thrust inovations. i just could not justify spending 60 plus shipping from thrust. it took me a bit to find the right size. thisis also the cheapest i found it at 36 bucks plus 6 for shipping.

We also are not getting ares from the same supplier as previous so our costs are going down and so will yours $40 plus shipping red,blue,black

 

[#ZERO]

keep in mind there is a big difference in these silicone elbows .

You're right the 4-ply stuff on eBay last much longer than the FP stuff. :biggrin:

 

[MADMAT]

I swear when hightempsilicone.com was still up and running they had 5 ply.

I can't believe that site just went under....someone had put a LOT of work into that site just to fold it up.

 

[ADDict]

The one crab posted has held up great so far for me, but only time will tell.

 

[GIL]

You're right the 4-ply stuff on eBay last much longer than the FP stuff. :biggrin:

All the ones I have had from FP only last a season and ALWAYS blow out in the exact same spot-directly in the middle of the 45* on the short side of the 45 (right side of 45 when installed standing in tray).

 

[THRUST]

free tip if you use the oem hose that goes there originally and cut to the right length and put another hose smaller underneath like a 2" section of the fuel fill hose they last forever . our new one a super strong and have had no issue yet with cooler colors

 

[SurferSmurf]

free tip if you use the oem hose that goes there originally and cut to the right length and put another hose smaller underneath like a 2" section of the fuel fill hose they last forever . our new one a super strong and have had no issue yet with cooler colors

mine was like this and was fine with the dry pipe but when i got the b-pipe i kept getting leaks. dont know why but it was all ways a pain in my a$$ with constantly removing that stupid type 4.