The newly released JSTL Inc, TL ignition module...with a touch of OCD!

[Waveblaster785]

You can't use them since they're individual coils stock system only drives a single coil, and the stock charging CDI does not generate enough voltage for these coils.

Thanks, I've had good luck with separate coils and my advent but wasn't sure if these would work.

 

[OCD Solutions]

Quick update on our project.

We installed this setup last weekend and got fouled by a bad ground that wouldn't let the ski crank fast enough to fire the second plug. We replaced the ground and tried again and ran into the same issue.

We used my new timing light to check his cranking rpm and found it was only at 300 and that was with the plugs out. This system needs to see 400 RPM to fire the second so that explains that. Scott was doing all his wrenching late and never wanted to fire up the ski and risk pissing off his neighbors so he was settling for cranking the ski with the plugs out. We headed to his house yesterday at lunch, threaded in the plugs and it cranked right up, even with the battery at 50%.

As long as it can crank fast enough to fire the first plug, it should get enough kick from that to get over 400 and fire the second.

 

[x2stroker]

Quick update on our project.

We installed this setup last weekend and got fouled by a bad ground that wouldn't let the ski crank fast enough to fire the second plug. We replaced the ground and tried again and ran into the same issue.

We used my new timing light to check his cranking rpm and found it was only at 300 and that was with the plugs out. This system needs to see 400 RPM to fire the second so that explains that. Scott was doing all his wrenching late and never wanted to fire up the ski and risk pissing off his neighbors so he was settling for cranking the ski with the plugs out. We headed to his house yesterday at lunch, threaded in the plugs and it cranked right up, even with the battery at 50%.

As long as it can crank fast enough to fire the first plug, it should get enough kick from that to get over 400 and fire the second.

376 rpm to be exact

 

[x2stroker]

One more headed out to South Carolina to a happy customer this one is made for a Kawasaki based engine

 

[x2stroker]

And three more to California

 

[Roseand]

And one to Wisconsin soon

Sent from my SM-G920V using Tapatalk

 

[x2stroker]

And one to Wisconsin soon

Sent from my SM-G920V using Tapatalk

Damn right! Cheap power to the people

 

[x2stroker]

How about a KDX 1200 with JSTL

 

[NooberJet]

I tried looking for your website. I cant seem to find it

 

[x2stroker]

I tried looking for your website. I cant seem to find it

Lol, sorry it's almost there. By the weekend should be up and running

 

[NooberJet]

Lol, sorry it's almost there. By the weekend should be up and running

Ok great thanks! Im new to TL and Im def looking at this for my DASA setup

 

[JoeD]

Was there ever a price posted for the system and different options? Is it still in testing or finished and available? I may have missed this info, didn't read through the whole thread.

 

[x2stroker]

Prices are as of today: Freestyle system is $809 shipped, with the smaller coils is $705 shipped.
As soon as my new coil on plug system is done I'll only going to offer one system only. Price at the moment is not available for that.

 

[JoeD]

These prices include a flywheel?

 

[x2stroker]

No, I'm trying to keep the price with the coil on plugs and the flywheel for around or under $1000

 

[SpaceCowboy]

Prices are as of today: Freestyle system is $809 shipped, with the smaller coils is $705 shipped.
As soon as my new coil on plug system is done I'll only going to offer one system. Price at the moment is not available for that.

Then you need a flywheel as well correct?

 

[x2stroker]

Then you need a flywheel as well correct?

Right now yes you do need to buy a flywheel from Jetinetics or modify your existing MSD one

 

[NooberJet]

Is there a rough ETA for the coil on plug system? Sounds pretty amazing

 

[x2stroker]

Is there a rough ETA for the coil on plug system? Sounds pretty amazing

Since is a new design and the manufacturer has to make a new mold for the coils I would say at least a month or two.

 

[NooberJet]

Dangit! I hate waiting lol If you need a test subject keep me in mind. Ive got a few months before I finish my chan. Im gonna hold out for this release