Trinity Composites Matrix Pro Hull

[carbonjet]

i wanna see a picture of bronson holding up a sign that says I TOLD YOU SO!

It's gonna be so cool to see these get out there and hash it up on the water..

Its exactly what freestyle needed to evolve to the next level in my opinion.

He's getting approached by several motor builders already to start a line of completed ski's, this should be a very interesting year for Trinity! :arms:

I personally would like to see him partner with Brian from Thrust, Baxter from Power Factory, and the guys from Team Scream..

 

[Big Kahuna]

i wanna see a picture of bronson holding up a sign that says I TOLD YOU SO!

Damn, where is motormouth?

JK. I like Bronson. He has alot of ummmmmmmm enthusiasm.

 

[ADDict]

It's gonna be so cool to see these get out there and hash it up on the water..

Its exactly what freestyle needed to evolve to the next level in my opinion.

He's getting approached by several motor builders already to start a line of completed ski's, this should be a very interesting year for Trinity! :arms:

I personally would like to see him partner with Brian from Thrust, Baxter from Power Factory, and the guys from Team Scream..

Unstoppable combination. This really will be a great year for freestyle. :Banane09:

 

[FL-cracker]

Damn that 09 Superjet looks freakin retarded next to that thing.... looks like a whale sperm.

 

[Big Kahuna]

Damn that 09 Superjet looks freakin retarded next to that thing.... looks like a whale sperm.

only question I have is how in the hell do you know what whale sperm looks like??? :dance::nana::buttkick:

 

[GDFL]

Not bad Bobby. Can't wait to see one in person when I come down this week. Now I just wish I had jumped in line for mine sooner :beerchug:

 

[djkorn1]

Stoked! ....can't wait to see it in orbit above the ocean. Pimp as hell!

 

[Troublemaker]

wowowow... thats top quality there!!!! pete you will be happy im jealous!!! sweet ski!!!!

 

[Kennay]

Bobby, in all honesty man, that looks killer. I was a bit skeptical of the design at first, but seeing all come together has really convinced me that it looks tits. Congrats!!!

 

[GIL]

It's gonna be so cool to see these get out there and hash it up on the water..

Its exactly what freestyle needed to evolve to the next level in my opinion.

He's getting approached by several motor builders already to start a line of completed ski's, this should be a very interesting year for Trinity! :arms:

I personally would like to see him partner with Brian from Thrust, Baxter from Power Factory, and the guys from Team Scream..

What-no LPW, what about a LPW 8mil Lamey?

 

[GIL]

I'll post pics tomorrow. Hull and hood are done along with the crate it is leaving in tomorrow. Hull is 74lbs with all plumbing, mounting points for oem equipment(engine, battery,waterbox, fuel tank) aluminum pumpshoe, and footholds with foamed upper deck. The hood weighs 9.8lbs

Trinity Composites EVO Pro
Trinity Composites EVO Pro/ Lustic sign. This is the first picture of the build Josh will ride at World Finals.
- Trinity Composites 68 lbs carbon/kevlar hull
- JSU Factory Kawi engine
- MSD total loss ign.
- 1 gal. Jazz fuel cell
- Riva power bomb 48 carbs
- Skat-trak mag 145mm pump, 12/19 impeller, and intake grate
- Exotic Signs Lustic sign. series graphics kit
- Thrust Innovations trim
- AP Designs Custom mats
- X-metal pole, steering and scuppers
More pics and number$ to come. Anyone seriously interested please call. Also this ski and two others can be seem at the Factory Kawasaki/JSU tents in Havasu at the World Finals.



So is this Matrix hull the lightweight version? I am assuming if u can build a SXR lighter, then this is probaly the midline hull?

 

[RoyalFlush@PCB]

It's gonna be so cool to see these get out there and hash it up on the water..

Its exactly what freestyle needed to evolve to the next level in my opinion.

He's getting approached by several motor builders already to start a line of completed ski's, this should be a very interesting year for Trinity! :arms:

I personally would like to see him partner with Brian from Thrust, Baxter from Power Factory, and the guys from Team Scream..

What-no LPW, what about a LPW 8mil Lamey?

I haven't seen much out of the LPW shop lately---not to say he isn't doing anything, just haven't seen anything either.

 

[GIL]

I have to say, the hull, hood looks great!

 

[RoyalFlush@PCB]

Trinity Composites EVO Pro
Trinity Composites EVO Pro/ Lustic sign. This is the first picture of the build Josh will ride at World Finals.
- Trinity Composites 68 lbs carbon/kevlar hull
- JSU Factory Kawi engine
- MSD total loss ign.
- 1 gal. Jazz fuel cell
- Riva power bomb 48 carbs
- Skat-trak mag 145mm pump, 12/19 impeller, and intake grate
- Exotic Signs Lustic sign. series graphics kit
- Thrust Innovations trim
- AP Designs Custom mats
- X-metal pole, steering and scuppers
More pics and number$ to come. Anyone seriously interested please call. Also this ski and two others can be seem at the Factory Kawasaki/JSU tents in Havasu at the World Finals.



So is this Matrix hull the lightweight version? I am assuming if u can build a SXR lighter, then this is probaly the midline hull?

At this point, I don't think the six pounds will matter. He probably beefed it up because it was for Petey.

 

[PancakePete]

gil, hull is carbon kevlar.
it is the same as everyone else would get.

hull is awesome. I will tell you how it rips in about a week. maybe less.:biggthumpup:

 

[guiness92]

That thing looks amazing, and I know im gonna get flamed for this, but im not a big fan of the lines on it. Too many edges for me, but that is just my opinion. The craftsmanship looks top notch though.

 

[PancakePete]

The hull was just drop off at freight company. Here are some pics of the finished hull. The cover pieces for the pole area are held by a carbon pin and one screw per side. The pin inserts into a hole in the hull then a screw on the back side. The splash guard is held on with three screws for quick and easy install. The hood lacks hoses which Pete will install. Well its on it way and good luck to Pete on his attempts to be the first American to double flip. May the force be with you.:starwars:

urr:urr:urr:urr:urr:urr:urr:urr:urr:

 

[GIL]

gil, hull is carbon kevlar.
it is the same as everyone else would get.

hull is awesome. I will tell you how it rips in about a week. maybe less.:biggthumpup:

I just thought about the fact that it is your hull. Bobby probaly added lil reinforcement for you 'the Pancaker'. lol Hope you LOVE IT!:brap:

 

[The Penguin]

That thing looks amazing, and I know im gonna get flamed for this, but im not a big fan of the lines on it. Too many edges for me, but that is just my opinion. The craftsmanship looks top notch though.

well - don't buy one then.

I like it. Looks much different than any other yamaha "compatible" a/m hull.

 

[guiness92]

well - don't buy one then.

I like it. Looks much different than any other yamaha "compatible" a/m hull.

That thing looks so nice, If I was in the market for a hull I would buy one even though I dont like the way it looks.