- Location
- Jersey
I used 5200 on the bulkhead, And marinetex on the exit, I ground the hull and pvc at @45 degree angle and filled with the marinetex, and sanded smooth. but I also was refoaming at the time, so I west system'd with woven roven on the inside around the tube. No leaks what so ever, and I don't need to use the bildge pump unless I'm washing the engine compartment. I've had the max in my boat for over a year now, went to hang with Scorn800 a couple of weeks ago at Tice's. let my ski float in the bay for 2+ hours without a drop of water getting in. Still have to watch out for zipties tho, no mater what type of valve you have.
Last edited: