- Location
- Harveys Lake PA
I thought this went along with their 21mm stroker crank?
Custom/Hybrid -- Wabuzun WAZ Cylinder kit --
- Thread starter JGringo
- Start date
masterblaster
X-H2
I was at body beach also and saw lenzi and stone both say it was the most powerfull motor they had ever rode ever...This motor sounded sick and exploded out of the water like nothing else a wf..its expensive though..very expensive and prolly needs their special pipe to make that kinda power
JGringo
When in doubt, Throttle-out.
- Location
- Lafayette, Louisiana
Okay, so I overpriced the cylinder kit earlier.
Complete engine cost breakdown from WAZ:
WAZ Cylinder kit W/Head and Domes = $4,515.00 USD
WAZ Billet Crankcase = $2,200.00 USD
WAZ Billet 21mm Stroker Crankshaft = $3,000.00 --ish [Assuming it is about 500 more than his 15mm Stroker]
Custom Wiseco Pistons = $756.00 USD
WAZ Dry Exhaust = $1,890.00 USD [or $1,500 for a PFP]
WAZ 10mm Angled Reed Spacers = $157.50 USD
V-Force Reeds = $250.00 USD
WAZ Intake Manifold = $400.00 USD
WAZ Dual Carburetors = $1,890.00 USD
MSD Total Loss Ignition = $1,695.00 USD
Total Cost for RTR 1,288cc Monster Engine: $16,753.00 USD
Compared to X-Metal 1200 w/ PFP Exhaust, Dual Full Spectrum Carburetors, Boysen Intake Manifold -- reeds/cages, and MSD Total Loss ((WITHOUT engine bed-plate OR Flywheel Cover))
Xmetal 1200 ($14,524.00) Vs. WAZ ($16,753.00) = $2,229.00 Difference...
The X-metal will cost more on top of the posted price because of the billet flywheel cover and billet bed plate...
-Gringo
Complete engine cost breakdown from WAZ:
WAZ Cylinder kit W/Head and Domes = $4,515.00 USD
WAZ Billet Crankcase = $2,200.00 USD
WAZ Billet 21mm Stroker Crankshaft = $3,000.00 --ish [Assuming it is about 500 more than his 15mm Stroker]
Custom Wiseco Pistons = $756.00 USD
WAZ Dry Exhaust = $1,890.00 USD [or $1,500 for a PFP]
WAZ 10mm Angled Reed Spacers = $157.50 USD
V-Force Reeds = $250.00 USD
WAZ Intake Manifold = $400.00 USD
WAZ Dual Carburetors = $1,890.00 USD
MSD Total Loss Ignition = $1,695.00 USD
Total Cost for RTR 1,288cc Monster Engine: $16,753.00 USD
Compared to X-Metal 1200 w/ PFP Exhaust, Dual Full Spectrum Carburetors, Boysen Intake Manifold -- reeds/cages, and MSD Total Loss ((WITHOUT engine bed-plate OR Flywheel Cover))
Xmetal 1200 ($14,524.00) Vs. WAZ ($16,753.00) = $2,229.00 Difference...
The X-metal will cost more on top of the posted price because of the billet flywheel cover and billet bed plate...
-Gringo
masterblaster
X-H2
interesting analysis
KTM434
Jamie FN Hickey
- Location
- Palm Coast FL
I've always wondered why more billet cylinders didnt have bridged exhaust ports. I wonder if MAXX could match the price of the Xmetal 1200cc package...
JGringo
When in doubt, Throttle-out.
- Location
- Lafayette, Louisiana
Who is MAXX?? I have seen several people speak of MAXX...
- Location
- Washington
He makes the MAXX Pumps. And will copy anything
JGringo
When in doubt, Throttle-out.
- Location
- Lafayette, Louisiana
Is this a stab at someone or will he legitimately copy anything?
Personally I think that someone (or a few people) should go in on a WAZ engine and then have this guy MAXX do some magic of his own and pop out a few of them in the states for cheaper!
Lmao... :beerchug:
Personally I think that someone (or a few people) should go in on a WAZ engine and then have this guy MAXX do some magic of his own and pop out a few of them in the states for cheaper!
Lmao... :beerchug:
- Location
- Washington
Read the 3 pages. http://www.x-h2o.com/threads/118156-My-new-product-by-Maxx-will-come-next-month&highlight=MAXX
Everything he makes seems to be of High quality though.