Waterdawg Prepreg Carbon f1-pro

[RiverRat]

Put an Xmetal handpole on it, IMO that is the only way to keep it looking sleek. Why did you not have the hood/hull channeled for the pole?

I did not know about that until after I got this one and he could not have done that w/ prepreg. Channeling the hood is just a insert that he puts in the mold, but it is not made for prepreg. I would almost rather have a a glass version that is channeled........almost :Banane35: I am going to run the billet rev handlepole on this hull. I don't want to spend anymore money on ski stuff for a while. I think I will get this together and just ride.

 

[nokfir]

Pretty sick

 

[RiverRat]

Back from getting cleared. It is pretty rough. The guy did 7 layers of clear and it is orange peel city!!! :smashfreakB: I have been knocking it down for hours. 400 grit to 600 to 1000 to 2000. Looking better but still so so IMO. Once it dries I will start buffing w/ different compounds.

 

[SuperJETT]

Shouldn't you be working on some rails at the zoo about now?

Watch the news, our plant is the one that had the fire/hazmat situation last night.

Who sprayed it?

 

[RiverRat]

Who sprayed it?

I small body shop behind the zoo. No one special.

 

[TaterStick]

Back from getting cleared. It is pretty rough. The guy did 7 layers of clear and it is orange peel city!!! :smashfreakB: I have been knocking it down for hours. 400 grit to 600 to 1000 to 2000. Looking better but still so so IMO. Once it dries I will start buffing w/ different compounds.

I did the same thing with the clear and spent days wet sanding it. I wouldnt bother with the bottom though. The first time I had my new hull in the water, all the clear came off in about 3 minutes of riding. It only came off below the bond line:261:. The base coat stayed on perfect and all the clear has been fine on the top deck.

 

[MADMAT]

I want that hull man.

 

[RiverRat]

I did the same thing with the clear and spent days wet sanding it. I wouldnt bother with the bottom though. The first time I had my new hull in the water, all the clear came off in about 3 minutes of riding. It only came off below the bond line:261:. The base coat stayed on perfect and all the clear has been fine on the top deck.

Yeah, Im not worried about the bottom. I am going to smooth out the pump intake but thats it. I really need it recleared on one side of the hood. You can still feel the carbon weave and I can't sand that much w/o breaking through. I will do that at a later date.....I want to get this on the water

 

[Goose]

use duratec highgloss clear.ive used it on carbon appearence and fills the weave turns out as if it were sprayed in the mold before carbon was laid down

 

[yamasaki]

that hull looks awesome!

 

[onlyFX-1]

Any new word on this ski?

 

[Idok]

bump for lone octane

 

[SJdippin]

I want one! But I guess step in line now


Sent from my iPhone using Tapatalk