What mods to make flatwater BFs easier?

[Shadow7874]

So im getting a RN for this season (my second) and my ultimate goal is to nail a backy by the end of summer. What mods will help the most?
Im thinking a trim system would be the best start.

 

[Troublemaker]

light hull, trim, 800cc motor or bigger ( better ) , big carbs, total loss, good pump..... you need alot

 

[joshuaeric]

Might as well pray for a 5 ft. wave.

 

[Rockstar]

a retarded amount of hp i would guess.

 

[Shadow7874]

Are we talking about off or our own wake here or like a boat wake?
I know theres no way in hell i would do one of my own wake with a near stock sj, but off of a boat wake with a few mods how would i fair?

And im always praying for 5 ft. waves

 

[cambo au]

id be saying with a light ski and ported 61x and trim it would still wanna be a really good boat wake
i still reakon at least a 800 or larger and a light boat

i know a few guys that are getting around on a ported 61x with no trim stock hull but thats with two wakeboard boats hanging to have a crack

 

[Mouthfulloflake]

I can get upside down off a single boat wake with a 61x and a B pipe, if the tank is nearly empty.

 

[JensNonsens]

I'd go with a 16 mm stroker, shouldnt have any problems with that... :Banane09::shooter3:

http://www.dasajapan.com/

 

[WAB]

Yes! The 'DJ take me to the party' song! :headbang:

The height of those rolls was just silly. They need to go for 1.5 and nosestab in.

 

[Speedfreak]

I'd go with a 16 mm stroker, shouldnt have any problems with that... :Banane09::shooter3:

With the height of those rolls and flips I am sure that he doesn't just have a stroker. That hull needs a motor just to keep it from floating off. It must have helium in it.

 

[sxi4evr]

The rolls in that vid are just insane!!!

 

[vjhardcore]

Wha Wha wha??? Ok seriously - someone tell me exactly what that boat is/has - someone must know that guy?

Come on - I'm not a freestyle specialist nor do I think I could ever be - BUT if someone told me for another $6 or $8G in mods I too could be superman like that...I'll start saving.

 

[joshuaeric]

It helps when you weigh 135 pds.

 

[Speedfreak]

Wha Wha wha??? Ok seriously - someone tell me exactly what that boat is/has - someone must know that guy?

Come on - I'm not a freestyle specialist nor do I think I could ever be - BUT if someone told me for another $6 or $8G in mods I too could be superman like that...I'll start saving.

How about $10 or $12G in the hull and $6 or $8G under the hood. Then the little things

 

[waterfreak]

holy crap!!

I'd go with a 16 mm stroker, shouldnt have any problems with that... :Banane09::shooter3:


YouTube - Jetski Freestyle 5Backflip DASA Japan

http://www.dasajapan.com/

that is absolutly insane height on those rolls.

Next build for me...16mm Dasa 1092cc !:Banane36:

 

[Motorheads5]

I'll bet that guy dont weigh 100 pound's

 

[waterfreak]

I think he almost hits the top of the bridge on one of those rolls!

 

[orangefinger]

no body weight at all..and then 4 foot tall mabey..id rather eat a burger or two and stay tall ...

 

[BruceSki]

the stuff at 1:18 or so just blows my mind... theres no body movement for it at all... just grab the trigger and point the bars... the ski does the rest for those few moves.


i dont think id know what to do with myself on a ski with that much power.... prob, just yank the throttle and end up separated from the ski.

 

[tightithrash]

Ok that right there was just plain sick..... He could pry double roll.