what will swap over from sn to rn

Y

yzman127

Location
Kansas City
I just picked up a rn hull and i need to know if it worth buying sn to get most of the parts? The only parts i have right now is

hull hood pole

complete TL system
61x cases and intake
 
MADMAT

MADMAT

Location
Ohio
IMO I would not mess with looking for a square. I would contact jetmaniac in here and start rattling chit off to him. Great great seller and has a lot of stuff.

And other good sellers can fill in the gas I'm sure.
 
Y

yzman127

Location
Kansas City
what parts swap because the plan is to run a 61x with fp, tl and 760 jugs if i find a deal.
will the gas tank, pump, waterbox, midshaft, rideplate, intake, ect fit a rn???
 
chad

chad

I pretty much love beer
Site Supporter
Location
Cheney lake Kansas
yzman127 said:
what parts swap because the plan is to run a 61x with fp, tl and 760 jugs if i find a deal.
will the gas tank, pump, waterbox, midshaft, rideplate, intake, ect fit a rn???
Click to expand...

Yes
yes
yes
No
yes
yes

the midshaft will fit if you have a 94 or newer square , otherwise no
I am Near Wichita , and have a ton of parts if you need anything . let me know .
 
Y

yzman127

Location
Kansas City
ill take any help i can get. This was the cheap hull out of Denver CO. its a budget build (1500-2000). I traded a 750 FP for the hull, hood, pole and my buddie had the TL and cases. So I need everything else.
 
58vwragtop

58vwragtop

Braap Certified
Location
Blue Springs, MO
Im also in the KC area. I have a few parts also if your needing some. Also you can contact Hardcore on this site he is "loaded" with parts and is in the KC area. Just let me know if I can help out. Or just sell me the RN hull!!
 
Last edited:
nightrider05

nightrider05

Location
St.Louis Missouri
If you can find a good cheap deal on a SN then do it.

The thing is, that there is SO much little stuff that will quickly add up if you try to piece the RN together. Stuff that you wouldn't think would be expensive, is. The midshaft, driveshaft, and long exhaust hose in my opinion are some of the harder parts to find and can be pricey. Definitely not impossible to find but can be a pain. Even stuff like the pole pivot bolt(around $50-80 with nut from yamaha) can be a pain to find used..hopefully you got that in your deal because those are RN specific.



I also believe the steering cable from the SN will work, its just a bit longer than the RN cable.
 
Y

yzman127

Location
Kansas City
I have an assload of 750 sxi parts if anyone wants to do so trading too.
after market ride plate intake grate, trd water box, pump with nice aftermarket prop, ect. all the stock parts from sxi.
 
Y

yzman127

Location
Kansas City
the ski im using for parts is a 94 so if chad is right the only parts i have left to buy is footholds. Im you to start a build thread. This was a hull that i got out of denver not the orange one
 
Last edited:
Y

yzman127

Location
Kansas City
i just picked up total loss that a buddie had from 1995 that is still brand new in the box and what rev limit do most people run.
Pro Progamable 2 MSD TL
stock 61x w/ westcoast head daul cooling, b-pipe limited chamber, stock carb w flame
 
dustin272

dustin272

Location
California
I just did this type of build using a 94 SN. Just about everything fits except the long exhaust hose, waterbox, and the fuel filler tube. I am sure with a little modification those things could fit. It was just eaiser to buy from Chris (Jetmanic) and do it right then mess around. I am running a 61x with a b pipe and RN oem waterbox. If you need any help let me know I will do my best.
 
dustin272

dustin272

Location
California
What type of pipe are you running? I am running a b-pipe so with a b-pipe I would have had to do a whole bunch of moving around to make it work. You should be able to pick up a stock or aftermarket waterbox for $100-$150 give or take.
 
You must log in or register to reply here.
Top Bottom