Zach and Libby memorial ski build for Mason

[GASGAS]

I have a stock nose piece and a lowered WDK nose piece stock turn plate and bars, stock exhaust stock side rails and rear corner pieces ,Stock pole bracket
stock hood hooks boat side and a stock hood

 

[w-nut]

i have a set off tubbie 2,s that i will send over if you wont them crab. pm me and let me know

 

[Matt_E]

Nice! :biggthumpup:

 

[JetSkiDood]

I believe I have a steering cable and Midshaft (if you are using the SN pump and shaft). Also, have exhaust hoses. I will look and PM Matt.

 

[WFO Speedracer]

Someone call SBT and see if they will donate a motor ,I am sure they could use the good publicity right now!

 

[SXIPro]

Do you still need a stock nosepiece? I see there is one on the hull in the picture.

 

[Crab]

Do you still need a stock nosepiece? I see there is one on the hull in the picture.

No, we have 3 avaliable and 3 hoods. Would be nice to score a lowered hood kit and bracket.......(waterdawg are you listening!!!):skull2:

 

[Crab]

Someone call SBT and see if they will donate a motor ,I am sure they could use the good publicity right now!

I think Charlie is going to check on that for us, or at least a good crank would be nice.

 

[snowxr]

I'll throw in a new lowered pole mount if needed.

 

[GASGAS]

So MattE any idea where we are with all this? I gave Crab some of my parts after our ride today: stock exhaust,pole bracket, hood hooks, hood latch

 

[Crab]

1. Hull - Crab
2. Hood - Crab (I got one, too)
3. Pole - Boris?
4. Pole Bracket - DangerBoy or Gasgas for stock type
5. Steering system - complete UMI from Flat Brapp
6. Bars - Motoman25/Phill
7. Throttle - Motoman25
8. Start/Stop switch - Thong_Bandit
9. Nose piece- Crab/Gasgas
10. Nose foam
11. Water box
12. Fuel Tank, ickup, etc - Matt_E
13. Battery Box - Flat Brapp
14. Tank Straps - Flat Brapp
15. Battery Straps - Flatt Brapp
16. Hull hardware - I got some, I need to see how much I have
17. Midshaft assembly, or parts - Luke Suva
18. Driveline couplers - Motoman25
19. Coupler cover - Flat Brapp
20. Ebox - WatCon
21. Starter -
22. Stator - Polako
23. Flywheel - Polako
24. Flywheel cover - 2nd Nature
26. Cases
27. Engine cradles - Phill
28. Crank SBT????
29. Cylinder
30. Pistons
31. Head - DangerBoy
32. Intake manifold - T intake, Flat Brapp
33. Reeds - T Reeds, Flat Brapp
34. Carb(s)
35. Exhaust, whole, parts, a/m, stock? Someone said they'd give a limited pipe. If I get a commitment on either a headpipe OR a manifold, I will throw in the other piece.
36. Exhaust hoses
37. Flame arrestor(s)
38. Throttle cable
39. Steering cable
40. Motor mounts
41. Intake grate - Kennay
42. Rideplate - Kennay
43. Pump - SJ/XPBri
44. Impeller - SJ/XPBri
45. Wear ring - Phill
46. Pump nozze - SJ/XPBri
47. Steering Nozzle - SJ/XPBri
48. Pump bolts - SJ/XPBri
49. Footholds - REV's from Flat Brapp
50. Turf - Phill 1 roll of B-stock
51. Paint - I can do the work, if I could get some help with supplies. - Possibly Thong_Bandit for some supplies.

52. Glassing supplies and fabric-Fiberlay???

 

[Boris]

Why is my name in red ?
You calling me a commie ??
:nana:

I have a storm to get ready for so forgive me if I don't go through my "spare stuff" box right now.
The pole is yours.

Also have X cases, 701 T cylinder, T reeds and I'm sure some other stuff.

 

[Crab]

Why is my name in red ?
You calling me a commie ??
:nana:

I have a storm to get ready for so forgive me if I don't go through my "spare stuff" box right now.
The pole is yours.

Also have X cases, 701 T cylinder, T reeds and I'm sure some other stuff.

Your blue then....:dunno: thanks again.

 

[Matt_E]

So MattE any idea where we are with all this? I gave Crab some of my parts after our ride today: stock exhaust,pole bracket, hood hooks, hood latch

Sorry, I just got back into town.

I've updated my first post with the list Crabbie just posted.

Boris, I added you for sure for the pole.
I'm sending you a pm about cases/cyl.

 

[Matt_E]

Holy ********, this has been up for less than 2 full days and we've got most of the freakin' ski together!!!!

This site and its members absolutely blow my socks off!

Thank you!

 

[w-nut]

here is a pic off the tubbies matt. hey crab just to confirm to where to send them , is the address you put up earlier ok or i can send them where you like . im not sure who will be delivering them since im sending them from new zealand

 

[SXIPro]

I've got nothing on the list. I would like to contribute something though. How about a couple cans of DAP Weldwood (red), some brushes, and a tube of 5200? I can run to the hardware store at lunch and ship it whenever you'd like it.

 

[Matt_E]

here is a pic off the tubbies matt. hey crab just to confirm to where to send them , is the address you put up earlier ok or i can send them where you like . im not sure who will be delivering them since im sending them from new zealand

Awesome!

Ship them to Crab's address, as he's dealing with hull/handling.

 

[Matt_E]

I've got nothing on the list. I would like to contribute something though. How about a couple cans of DAP Weldwood (red), some brushes, and a tube of 5200? I can run to the hardware store at lunch and ship it whenever you'd like it.

That would be great, I didn't even think to list materials like that.
Ship it to Crab's address, and I'll go put you on the list.

 

[Crab]

here is a pic off the tubbies matt. hey crab just to confirm to where to send them , is the address you put up earlier ok or i can send them where you like . im not sure who will be delivering them since im sending them from new zealand

Yes thats me, good old USA.