As I said before it can be done I've done it. EFI is very sensitive to water ingestion there is a but load of wires and stuff to get wet. Ive updated the system with a smaller fuel pump that the SXR charging system can sustain but don't expect many start and stops. i get 2 or 3 with the...
Ive done it it works great for starting a ski but the throttle response is not that great. Plus you need to spend hours and hours and hours on fuel map tables I have the throttle body intake manifold and injectors and al the software if somebody wants to purchase them from me. Then you need to...
I really wish i was there man I still have all my USMC DIVE gear with fins twin 80s my dive compass and plot chart i can cover 5 k square in a day lake erie isn't Spit compared to some of the search and rescue dives I've had to do. We had an AAV sink 3 miles off coast of Okinawa in 06 They sent...
Negative battery cable broke so i replaced it and now i keep blowing fuses as soon as I hook the battery up. All wires checked no cuts or cracks in e box, checked wires going to stator coil nothing cut or cracked. Ski has an advent ignition. Is that what happens when they go bad? I have...
Paul Lehr suggested BPR 8ES on my Dasa Kawasaki 970 I have tried the Iridium ones BPR 8EIX. The iridium plugs did better with 100LL as far as fouling but there was no performance gain. The P means the electrode is extended to reach further into the cyl I assume it put the spark closer to the...
Do FISH use a PLASTIC POO PALACE.... NO... THEN ME EITHER MY ancestors were fish so its totally OK. Naturally I will be there. Are there Light Weight Hulls Coming BOB Superfreak KDX RICKETer or Trinity.
Im running a Dasa Sxr Motor and it runs great finally. Some time ago I read something about lighter or heavier PV springs that can be installed to help with low end. I know that motor isn't meant to be a beast on the low end. From what I understand it was meant for mid to top end power and...
--also super-- important check to make sure the highest exhaust bolts are not too long on dasa kawi motors if the bolts are to long they will press on the power valves and actually press them further in and they will snag on a piston ring ive seen it.
So I broke my steering cable today. A few years back when I purchased the last one I had a choice between a "Heavy Duty" cable and a OEM cable, I went with OEM. I looked on a few of the usual web sights and didn't see any "Heavy Duty" ones. does anybody make a cable for an SXR that will last...
pwc trader do a search for it a lot of brand new ones come up and a few used all around the country for a new one its better cause you don't have to call around to a bunch of dealers
Steve at KOMMANDER suggests adding a cooling line into the motor tapped into the water jacket towards the top of the head on the side it cooled my right down. I also went with parallel cooling to keep the exhaust a little cooler.
Go to west marine get the FUSION AUDIO head unit (make sure to get the extra warranty) it comes with 2 7in speakers install the head unit in the ski. I kept mine contained to the hood with a quick disconnect for the battery. Cut 2 holes on the side of the hood for the 7 inch speakers waterproof...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.