Search results

So does this mean they will be bumping pros up to a 1400cc limit?

I’ll be out in California over Christmas then heading back to Texas a week later. Not sure if that would help you out or not, but let me know.

I had an sxr driveshaft in an 1100 conversion that was about an inch short, I had Sasquachcrap on here lengthen it. Worked perfectly. He cut and welded in a piece on the front side of the bulkhead bearing

Hey guys, built this hybrid almost 6 years ago while I was still in college. It’s been sitting in a corner the last 4 years and I finally found some time to pull it out to get it finished up. Figured I would post up the details and pictures on it in case anyone is thinking of doing something...

X2 for Airtime Products. They are in the UK but I put an order in for an ez start and some miscellaneous parts on a Monday and had it at my door on Thursday. They make some very nice parts.

Great seller here folks. Thanks Stu!

Those look like 701 industries mounts. Only company I know of that made different color options on the dampening section

Just curious why some of these glove companies like illusive won’t restock normal sizes like medium or large? Not one glove on their site is available in those sizes. Kind of sucks because they have some cool designs. I would have liked to buy a couple pairs

Just curious why some of these glove companies like illusive won’t restock normal sizes like medium or large? Not one glove on their site is available in those sizes. Kind of sucks because they have some cool designs. I would have liked to buy a couple pairs.

Yes 2 square tubings 6 ft long with 2 inch roller wheels welded to the top of it every foot. And an electric winch that bolts to the opposite side with a hand control that plugs into my trailer plug on the truck. The square tubing is notched to slide onto the edge of the bed hauler so it can’t...

X2 for Brandon at high octane industries. He puts a lot of effort into the covers and they turn out great! I’ll be ordering them for all of my skis

I’m using square tubing with 3inch roller wheels welded to it.

The attention to detail is amazing! Love your work.

Canaan Rutland in Canaan Rutland on Facebook or RutlandRacing here is who I used. He does a good job and ships fast

I’m guessing it’s just down because I ordered a part off the website last Monday and received it on Friday.

I’ll bite: 1) What kind of “pwc products”? 2) I have no idea for expectations because there are no specifics for the “experience” listed 3) Depends on the “experience” 4) Need more info before that can be determined. I assume fully accessorized pwc means a newer sit down. So for me, its notmuch...

Good rule of thumb is anything that shows in the primer will show in the clear. And I always use 400 grit to knock down the orange peel and give the basecoat a little bit more to grab on to. If you use a finishing glaze because the pinholes are too deep, you will need to put a coat of primer...

I didn’t catch that when I was reading through the features but I agree that is a huge downside to the product if that’s the case. Otherwise, I could see myself buying a couple. I went with a full alarm and camera system on my shop for the time being.

That is some serious height!!

I’m not familiar with the ppg line so I’m not familiar with the mix ratios On those products. Is it 1:1 with hardener for primer, 2:1 with reducer for basecoat and 4:1 with hardener for clear? Knowing what the ratios are first helps to know exactly how much reducer and hardener to buy. I like an...