Search results

thats an awesome shot FYi the "other Dude" is Ross Champion

Did you change tanks ? should be 2 nipples on the battery side of the tank one for the return from the carbs and one for a vent however , I dont think your problem lies with , carb jettting, tank vent or the 650 chamber, those are all things that lead to a poor performing engine not one...

They (midshaft housing spacer) are necessary due to the flat firewall otherwise the midshafts inner bearing carrier will rub a groove in the firewall and driveline longevity will be reduced Db

Many time people confuse poor running off the bottom to be a rich condition, when its the opposite, 2 strokes with some timing advance like lots of fuel down low (unless you have a 10 minute no wake zone) with your setup personally I would try a 120 pilot 145main 2.3 n/s and lower the...

If your doing a lot of soldering (not circuit boards) invest in one of these http://www.micromark.com/Triton-Resistance-Soldering-Iron,7890.html you wont know how you ever got by without one for quick field soldering I just use a bic lighter Db

The main Point I was making is NO oem superjet takes an "ES" 3/4 in reach plug putting an es plug in an head designed for an HS length plug causes bad things to happen he originally stated was using " B7ES" plugs it is true that there are many instances of the Factory service manual not...

May want to check your manual stock yamaha 701 should call for b8hs or br8hs "es" plugs are 3/4 inch long and used in most aftermarket heads the OEM head requires 1/2 in length plugs (hs)

what he said but an 1100 is super easy install with the electrics up front

Jet Pilot A-10 attack vest Best Ive ever worn

Bobby Biggs FX-1 OG only freestyle Pro to tour with an FX-1 used to ride with us at Oil piers all the time now back to your regularly scheduled debate Db

washer on the midshaft, nothing on the crank . coupler should seat on the seal surface edge of the crank Db

QUE PASO Sorry we can not respond to PMs We are in Peru at the moment. please call the shop or visit our site for questions www.Cold-Fusion.com back in 2 weeks

we Carry the Blowsion riser bars they are 25.5 wide and have a 50 mm (2 in ) rise Db

gone at the end of the week

Really Guys ? other than the above comment Which is true, I dont think he did a bad job. The outer diameter of the flywheel is doing no work after the Bendix disengages. Remeber this is not a charging flywheel, and he lightened the ring gear, the mass that is farthest away from the center...

Just a Heads up Cold-Fusion's technical help will be unavailable From May 1 until May 18th So if you need Technical Help on any of our products that our dealers and Distributors cant answer please contact us next week Our Order line and Super fast shipping will still be in place, But do...