Search results

Norbert is uncompromising in his workmanship . This skis layup is "designed" not random kevlar, carbon, fiber glass cloth every strain has its place for the function its to serve I'm mesmerized everytime I look at Norbert's work Db

F1 Freestyle its for those who cant turn

some day , in all my spare time, I want to try a small electo magnet and relay . set up so as long as the motor is running the relay is powered open so the mag is not energized and when the mtr stops the relay closes and energizes the mag to hold the scupper closed Db

I got a fourth 1/2 in hard line installed and will run the stock yamaha siphon bulge

Night one " building a better mousetrap after installing the INCLUDED and fitted pump shoe, nice touch Tem. I moved to the front of the ski and installed a bow hook with a nice stainless backing plate ,I did Need to make a spacer to move the pump shoe back about a 1/16 of an inch so the pump...

project has been under wraps here, but just picked the ski up from the painter (Airtrix) and had to give you all a sneak peek will Day-view at Surf slam Tem did a glass wet layup hull with carbon fiber hood for us. I dont have a weight but is way lighter that our Rickter and super solid...

Yes they are m6 or m6 x 1.0 which is actually course thread metric not fine fine is m6 x .75 Db

M6

No ,pink wire is for the temp sensor and no

now how in the world did you lose it out of this :pokey:

Will after watching 4-5 seasons of Dexter now you have a few Ideas how to help us out with the crappy sellers :sneaky:

thats One of my old skis, when I sold it it had all the good stuff , b-pipe, billet pole base, billet pole mount, half girdle head and had a cross brace in the engine compartment that was my back up ski so it didnt have a lot of hours on it as I almost always rode the ones with the 144...

how long is it ?

Sn cable is 125 inches with 3.5 throw pre 08 Rn cable is 122 with 4 in throw fx-1 cable is 116 in with 3 in throw

Check it out we finally have got the shopping cart on our site up and running, its still a work in progress and we will be tweaking it daily , we ditched the flash so this should load and navigate quickly for everyone So, check it out, and let us know how it navigates for you or if you see any...

Every one we have set up with a 61x stator was different and each had to be verified and than adjusted with a flat timing curve, We set the stator on the mark and use the timing offset feature to get it right. no issues so far If you are running an aggressive curve on a 61x stator I would...

Patron , limes, and a sawzall, the reason FX-1s were created great job, dibbs on a ride in Datona Db

Sweet waves John, Im in for a trip to Shipwrecks. last time I was at cabo arch we took a panga through it. the marina there is 1st class

Dude , where do you work ? nice oven,

Db I think you are confusing the mid shaft spacer that we make, that goes behind the midshaft housing, with the 2 Coupler spacers used to move the mtr forward that are supplied by Rickter the midshaft spacer does not move the motor, it saves damage to the firewall Db