Search results

I did talk to someone at thrustone today. confirmed listing on website is old. I noticed the mx100 cylinders exterior machine lines are the same as et. anyone have info on the mx100 engine?

Trying to see if anyone has info on who or where ET cylinders are being made again? Thrustone shows 967 and 1107 top end kits available. Anyone know if they are really available? I tried calling and leaving a message but no one has gotten back to me so far.

nope. jet ski stuff never made enough money for the hassle. jet ski engines were never the majority income for cpt and just weren't worth it. building a new ski for myself and selling my current ski and my back up (this one listed).

2017 tigercraft sv1 780 +4mm stroker 44mm dual carb php billet intake manifold factory b pipe Solas 144 mag pump kp handle pole thrust steering thrust trim adjustable footholds front foothold awesome surf ski been sitting winterized and fogged for 2 years. very little time on entire build...

Any carbs available with it.

where is this located?

is the hull glass or carbon?

Where located?

What brand?

I use this With these Everytime i ride. Under 50 bucks total. My friends think it's funny they see me bobbing my head while ripping. They just don't understand how i can listen to country while riding. Chuck Palmucci

Tuck you need a blaster mod chamber fyi. You don't have the u pipe or other parts to run the limited. Chuck Palmucci CPT Enterprise LLC 609 510 3062

@Storbeck You would want to be around 7.5:1 dynamic compression. To achieve that with your bore size and port timing you'd want your trapped head volume to be 33.5cc. That's assuming your engine is stock stroke. One helpful hint is if your modifying stock head start with a 701 head not 64x...

62t cylinder will work great. Dont raise the top of the exhaust port any. Just follow the template to widen the exhaust. Honestly most 62t cylinder the transfer ports match fairly well so dont go crazy there either. You can cause more harm then good if you get the transfer port exit angles off...

YES. Not going to make any magic and make them good enough for 1000cc but def can make noticeable gains for the 701-771cc range .

I got a 27.5" stance 2 a year ago. I love it. Was on a full suspension 26" Jamis before that.

There's a free boat ramp on the west side of the Halifax river in holly hill. It's less then 10 minutes from the event ride zone and has next to no slow speed zone. Great test and tune place if your looking for a closer spot to the ride

Got a min to reread all your numbers. 2 questions. Does your dome cc measurement include the spark plug hole volume? Spark plug hole volume is 1.5cc but i only subract 1cc for calculation because 1/3 of the volume stays open even after the plug is installed. You give 37mm as your measurement...

@Zero Client If you read the text at the bottom of that calculator again it talks about using the intake valve closing to get dynamic compression of a 4 stroke. Not a 2 stroke. You use the closing of the exhaust port for dynamic or trapped compression ratio on a 2 stroke. I can't stress how...

Warning hopefully this doesn't get to long. The link to the compression calculator above is static compression ratio not dynamic. It doesn't does not factor the exhaust port height. http://www.torqsoft.net/compression-ratio.html This online calculator is what you need to live by. Keep in...

Scott Give me a ring on the phone. You still got my number? I'm pretty sure I didn't deck the cylinder when it was here. Send it over and ill take a cut on the deck surface to make sure its true. Just pay the return shipping Thanks Chuck Palmucci CPT Enterprise LLC 609 510 3062