Search results

No

And ovp will not work with your pole

I have steering for you

@ eastcoastjumper leave it spaced where it is

When I was buying my machine I was in the same situation as you between the millermatic 211 and the tig machine I bought. Thermal arc 186. I mostly weld aluminum so the tig was te advantage for me especially with a lot of cast aluminum. Whenever I need to weld steel I can you switch the polarity...

Do you have a mig with spoolgun? I tig welded everything never even tried a spoolgun probably won't ever knowing how to tig. The frame itself I have no problem getting to penetrate at about 130amps on my machine. The back peace of channel is 1/4" this so I had to crank it up a bit to about 180...

Yes I was planing on turfing them or some sort of hard plastic

It didn't take long once I got going. I cleaned it all up with steel wool then polish an a pad. Just like waving a car or boat

I picked up a triton trailer a few weeks ago and figured I would make an all aluminum trailer out of it. Well everything minus the axle, leaf springs, lights and tongue. I polished the entire trailer before I started fabricating anything. Bunks are 2.25" tubing. Made my own uprights. The trailer...

Rrp spring and not modified at all

Do not over tighten the rrp pole bolt it will snap. You need to make a spacer inside the bracket that will let it pinch the bracket instead of pulling it together. My pole bolt snapped and I made a sleeve between the bracket and I still of the spring in there. My pole moves effortlessly and...

If carbs check out good. Do you hae a primer. My plunger went bad once and when the tank would get pressurized fuel would go straight through the primer line and down the carb.

125 low 147.5 high 2.0ns 80g spring With stock flame arrestor 1 3/4 turn on low 1 1/4 turns on high

You may be going to daytona without a ski yourself

All those R model skis will not work. It is a different style 155mm pump. Along with any Xlt or SUV. The xl1200 will not work eaither unless it's a 98

And continued to be tuned with no rings for xxx amounts of hours

You have yet to have a "properly" tuned 701 yourself

My dad and brother moved to Utah last season so I usually spend about a month out there every season depending on snowfall. February/ march is best time to be out there

How much is a lot. I just had to buy another gallons of oil. I'm on 13th gallon of the season. Unfortunately I think were done until spring