Search results

does anyone have a diagram of where the fuel lines go on stock superjet. using oem petcock, they were all taken off due to dry rot. nothing was marked. any help greatly appreciated ALL OEM STOCK SETUP

same for me, stock choke hole. that location is probably the most popular. all you need to do is enlarge the hole a bit

scroll back a few pages, we had a great discussion on this topic.

i was interested in same.. can't find too much info on them. i know the 701 is 90mm bore. can't find bore size on freeriderz inc nozzle

Great info. I think ATP has been discontinued. I contacted them, they told me they are sold out and don't think they will produce anymore any time soon.... Any info on the freeriderz inc- nozzle

anyone pros and cons???? currently running the 701 however, looking into the ATP or FREERIDERZ INC. any experience. and where to buy????/

if you want pm me ill send you some step by step photos of when i did mine, some exact footholds same exact ski

hello, has anyone had any issues with the combination of SB flywheel cover & jetnetics flywheel? I'm currently running a stroked aftermarket crankshaft from ADR and jetnetics flywheel, once i installed my new sb cover i noticed the face of the flywheel bolt was gently rubbing on the lexan...

hello purchased a factory pipe brand new from blowsion. and this thing came with NO bolts (8) from cylinder to manifold!!! are they supposed to come with them? my oem bolts are too long and bottom out before the pipe is even snug. what have you guys done?

thank you for the tech input. i do like the idea of the flow control. do keep water out at idle, so I'm assuming your pisser is after the flow control. i could see how that could be annoying because the water flow will come and go depending on rpm. however can be tuned my easily?

coffee can size for me

Hello my engine builder recommends putting a 2.5 jet in the cooling line going to chamber. i assume to limit the water. has anyone done this before or used a jet works flow valve instead? pros/cons/inputs?

just purchased JD#60 intake grate. i love the aggressiveness compared to my WORX-201. however, the craftsmanship is horrible made of cheap cast aluminum. and the casting isn't 100 percent true. i took a file and dremel to it for an hour and smoothed out all of the left over shlage from cast...

What is preferred choice... jd#60 or worx 201??? any feedback

thank you. so the first number is for low end and the second number is top end? so a 9/16 will hit harder than a 10/16?

everyone has there own opinions so please add yours. below are some data from the industry leaders what do you think? setup is DASA pv 850 with 148 solas pump / b pipe. *blowsion recommends = 10/16 *impros recommends = magnum swirl 10/16 *freestyle innovations recommends = d-75, 7/12 *and...

Im a new OCD customer... so i can say his customer service and ingenuity is TOP NOTCH!! So now I'm a life long customer. OCD all the way.

yes i used 5200 when installing the bracket and all hardware. i also run a rrp dual breather, however my excess water intrusion is with the 2.5 x 2 diameter holes drilled with the flexible grey hoses pushed through. i can shine a flashlight and see daylight between the seams. so i know water...

thank you FLIGHTPLANDAN for the awesome legitimate info. I'm sick of all these unrealistic follow the leader parts.

no problem. i meant to say 2:1,,, 8:1 is to weak