Search results

The 3 Advents I had all had issues with being too far advanced on startup. Once running they were quite nice, but they idled really rough. Have all the problems been sorted out with them, ie. are they being produced consistently and are they reliable? If it wasn't for the initial starting...

I've tried a few different ones, but the best ones I have used is the ATP Scupper. It matches the stock exhaust flange, so it looks nice and symetrical from the rear and it has a 2" recess into the flap area. The mating surface is angled down, so gravity also helps the keep things sealed...

Oh yeah....about the plans, it's best to send me an e-mail through the site so I can just reply with them in a file!

Yeah, you're right about both things, the front (where the axle is) needs to have the rails bent down to make pulling the ski on a bit easier. The square tube bends fine, you just have to dent it a little inside and give it a crack with a mallet. As far as another crossbar goes, it's not too...

Do you mean there is no locator hole for the case pin, or no oil hole for lubrication? The hotrods cranks have no rear oil hole, but it's easy enough to mod the cases and cut a small notch into the side of the bearing for lubrication if you are worried about it.

All those that have asked for plans, I'll scan them up and get them to you today. As for the axle, it's just alloy tube that is a perfect fit for the inside of the square tube. Doing it like this gives you one more point that is removable and makes the whole thing more narrow when it's all...

So, I got a little bored during winter and in between motor rebuilds, failures etc, so I decided to whip up a quick beach tote. Yeah, it probably looks familiar, but I can assure you it cost about $50 Oz dollars to make (minus the wheels). Anyway, here's some pics. If you like it, hit me...

It's funny, although I hear this a lot, I've never had a dome spin on me with the 2 Riva heads I have had. Neither of the 2 Riva's had the dome locating pins in them?

I pretty much have everything that he sells. I love the way you can get odd Y-fittings, jap style connectors, reducer barbs etc. All that stuff that is hard to get at your local stores, he has it in one place. Oh yeah, he's always just an e-mail away too. He's helped me extensively with a...

Unfortunately, it's hard to please everybody and although I'm not taking sides, I've found that Blowsion are ALWAYS willing to help us guys out in Australia. I can understand both sides of the argument, but I also think that John's reaction to your letter is somewhat normal (ie what most of...

Yeah, I'm with BK, I could have sworn you wre going to say he died from a heart attack or something.

I can prob help with that. The black and yellow wires are the curve switch wires. Open is curve 1, connected is curve 2, so just hook up a switch to it. Also, when wiring, you'll notice 2 red wires, these are just power wires as normal. The good thing about the Vilder is that it doesn't...

Unfortunately, no, I didn't! Apparently it is on the software disk, so even that would be handy!

Roger....(ramjet) Will do....cheers!

Guys, I'm running a set of 46 Mikuni's on my 701 and have found that under idle the inner venturi seeming to be leaking fuel. I have a popoff of around 20psi and have rebuilt the carbs completely from top to bottom including new needle and seats. I have a spare set of new needle and seats...

Yeah, I'm keen to get a copy to Australia as well. Are we able to just paypal or somethinkg direct to you with some details? Cheers. Leigh

Go to your local bowling alley and grab one of those hard bowling ball cases, it's bound to fit on your gargantuan sized melon...;)

Jared, you can buy the West Systems epoxy from a supplier in Melbourne. If you need the number, let me know and I'll dig it up. I used West to re-enforce my hull with carbon fibre and also mixed it to form a paste and full holes.

Haha, this must be a common one. I did exactly the same thing years ago. 16 stiches outside, and another 10 inside. It's wierd being able to feel your bone with your finger! It's strange, you expect your bone to have some feeling when you touch it, but it don't!

PM sent...and bump, for anyone else that may be able to help?