Search results

Wow, that's a lot of damage.

A trailer for every ski, and a stand for every ski.

38's

Benn running the Solas in our SJ for years. Set it up right and it will last, (thanks John at Wacon). Rough water hook up is great.

What's the problem with the current jetting?

Been running a Zeel for the past 3 months, so far so good I like it.

That’s the factory foam they installed. It’s molded so it fits around the foot holds when I put it back together I added some more pink foam from Home Depot.

Our XFS Comp hull is a custom build, carbon with foam, so the bulkhead isn't sealed to the bottom of hull. It has no scupper tube, so any water in the hull flows quickly under the tray and out the two scuppers. I'm not sure what type of foam they used in XFR's, but if it's like ours there is...

Sold

Factory Kawasaki SXR 800 Jet Ski Cover. It's in perfect condition, was only used to cover ski in the garage over winter. It has no rips, tears or holes. $100 shipped to the lower 48 states. Insurance is extra if you want it. PayPal F&F or add the 3% fee

I'm no expert, but I have never seen water routing like that. I would think one water line in to manifold and one split in two, each going to the side of each cylinder. Then one out from each side of the head, not two out from one side only.

Also, do yourself a favor and cut up a pool noodle and stuff it into the area between the 800 bedplate and the case. That space will eat up any bolt, nut, washer or socket you drop and you won't get it out till you pull the engine.

Yes, that is the same way I ran my water lines.

There are extra holes in the bottom of the 1100 case. I would make sure you use Loctite on the four bolts holding the bed plate to the case and I would drill the bed plate so you could add another bolt. Our engine vibrated loose from the bed plate a few years ago. Our ski is the exact same set...

I'm looking at a knee replacement this fall, I also worry if I'm going to be able to ride in the future. I wonder if recovering from a knee replacement is similar to a hip?

Feel the water, warm or cold? That will narrow it down. Has duel cooling been added, that's another place to look.

I didn’t know that about the Zeel. I’ll check out the bilge pump switch, easy enough to unplug and see if it’s still drains the battery.

It's been a fresh water ski that has ran perfect for 10+ years, but this last year it's driving us crazy. First we had a water in the ebox issue - solved that, grommets around battery cables were letting water in. New cables and grommets and confirmed fixed, the box is now bone dry. Next, a...

Yes, the new start stop switch harness fixed the issue. I cut the protective covering off the old harness, and the wire insulation at the spot where it goes through the pole bracket was kind of roughed up a little. Stripping more insulation off in that spot. I found two wires that had some...

A longer rideplate will help