Search results

Thanks, that sounds good to me since this one is sealed in good with 1211 and I am lazy [emoji846] Sent from my iPhone using Tapatalk

I rode both, imo the 4 stroke Superjet for rec riding seems like a good pick. I rode one with all the lites racing mods and it was fun, but I was still surprised at how crappy the steering was even with an ovp and quick steer. If it is for bouy chasing/racing I would go SXR 1500. It hooks up...

Sounds like timing issue with something moving index assuming the port job is not hacked up. Check the flywheel and stator timing along with flywheel key. Make sure you’re not mixing matching incorrect stator to flywheels and cdi’s. I can’t remember, but the magnet size is different on the old...

One of my two stroke Superjets is starting to make the whining sound from the starter. It starts and runs fine. Should I just run until it goes or pull it? Is this usually the front bearing on the starter making the noise or could it be from the Bendix? Bendix is engaging fine no spinning and...

Building another motor and looking for a working oem one, located in SoCal Sent from my iPhone using Tapatalk

Yeah, decided against running it. Threw it back in the bin. Seemed way softer than a new OEM one. Sent from my iPhone using Tapatalk

How did you get that factory bpipe powder coat off the head pipe, damn that thing is clean! Sent from my iPhone using Tapatalk

If anyone is looking for stock 760 cylinder for a lites build, pm me. I have an extra one I no longer need . Sent from my iPhone using Tapatalk

Cool, thanks. So give the aftermarket one try Sent from my iPhone using Tapatalk

Anyone try one of these I got it off of eBay, and the durometer seems quite a bit softer than oem. My old ones pretty worn out. Wondering if I should just get a OEM one instead Sent from my iPhone using Tapatalk

I have a Skat mag 12v setback and It way heavier that stock. But my li-on battery and hood is way lighter. I will see if I can weigh mine when it’s done. Thank for sharing! Sent from my iPhone using Tapatalk

Getting around to installing one of these on my rn superjet. Hoping one of the members here has experience with it. Bracket looks good in well built, but on a stock pole, it looks like the stock pivot bolt will hit the fiberglass. Do I install the pole to bracket off the ski? Anyone know if a...

Had one, make good power and revs, my mechanic tried his best to keep the cracks from coming with no luck. I also remembered him complaining about the aluminum they used. It was not easy to weld full of impurities. We rode the piss out of our skis back then, so we were pretty hard on them, might...

Shot in the dark, looking for someone to paint my superjet top deck. Sanded primed and ready to shoot. I can mask if you want. Thought I would try here before I try cold calling the local body shops. Looking for simple all white or black or whatever is available Sent from my iPhone using Tapatalk

fwiw, mine hits there as well. It actually wears down the leading edge of the coupler only creating some cosmetic damage and I think it somewhat self clearanced with braap time[emoji3] Sent from my iPhone using Tapatalk

That is a great idea! In have always used a torch and needle nosed vice grips. It sacrifices the screw but usually gets them out. I had one break on me out of the ~9 I have extracted. Sent from my iPhone using Tapatalk

Thins the blades, cuts back, and repitch. It rips. Sold my ski so no longer need it. Works way better than the stock one. Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

New open box. Just pulled out of the box to dry fit and then took off. $175 plus shipping. Will trade for WCOT if you got one. Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk