2 standups on a "single" pwc trailer?

[McDog]

I bought this thinking i would put two skis on it soon, but i only have 12 inches on either side to the end of the fenders and another ski is around 30 inches. That means with two skis they will be hanging past the tires on the sides. That seems pretty sketch to me.

Opinions? Photos of some setups?

 

[Jksuperjet]

I am in a similar situation, I will take some pics this weekend. I'm thinking of just having both skis hang over a little on each side, or putting the skis on one in front of the other. I cant tell how long the neck of yours is, but mine is extremely long so idk if that will work for you.

 

[WB1994]

Too skinny. Look for a small boat trailer. They have a slightly wider axle than a standard sitdown trailer. I got mine for a couple hundred dollars. Cut about 4 feet off the tongue of the trailer because boat trailers are long. I can fit two standups or a blaster 1 and a standup. I can also tow it with just one ski on it.

 

[mr.fixitman760]

my current setup

 

[mr.fixitman760]

thinking about adding a 3rd set of bunks in the middle so its not lop sided with just one on it

 

[MarkWalker]

My set up. Started as a single couch trailer.

 

[McDog]

I thought mine was a single pwc trailer, but maybe it was a standuo trailer.

 

[madd_dips]

I bought this thinking i would put two skis on it soon, but i only have 12 inches on either side to the end of the fenders and another ski is around 30 inches. That means with two skis they will be hanging past the tires on the sides. That seems pretty sketch to me.

Opinions? Photos of some setups?View attachment 318688 View attachment 318689 View attachment 318690

Do I see not 1 but 2 Titans!?

 

[madd_dips]

 

[Jksuperjet]

I thought those were pvc tubes at first... Very clean set up! Weld them yourself?

 

[McDog]

Looks perfect.

My set up. Started as a single couch trailer. View attachment 318720 View attachment 318727 View attachment 318729

 

[madd_dips]

I thought those were pvc tubes at first... Very clean set up! Weld them yourself?

I wish I could take credit for this stud of a trailer. It literally is perfect. in this case I def believe in love at first sight. Lol. True work of art by himself @Gliderskier thank you again sir. Now carry on.

 

[Vumad]

I bought this thinking i would put two skis on it soon, but i only have 12 inches on either side to the end of the fenders and another ski is around 30 inches. That means with two skis they will be hanging past the tires on the sides. That seems pretty sketch to me.

Opinions? Photos of some setups?View attachment 318688 View attachment 318689 View attachment 318690

That is too narrow for 2 skis. Sell it as is and get a single couch trailer.

I had a trailer I widened by using 4x4s then mounting the bunks to that, but only the bond rails were wider than the fenders, the bunks rested on the inner 1/3 of the fenders.

Now I have a double couch trailer that holds 2 stand up and a B1 with nothing widening the frame.

 

[McDog]

That is a single pwc trailer. I'm guessing I need a bigger singke pwc trailer.

 

[Vumad]

That is a single pwc trailer. I'm guessing I need a bigger singke pwc trailer.

A single trailer for a stand up, something old like a B1 or 750ss. By single couch we're saying like a gp1200 or bigger.

 

[motoman3000]

Single >> double trailer conversion

Stagger the heights and you can close the gap some

 

[Vumad]

Single >> double trailer conversion

Stagger the heights and you can close the gap some

If you can, Post the width of your frame. Also post a picture of the brackets on the outer bunks so he knows what to buy.

 

[WB1994]

Selling mine. Its in NH.

 

[motoman3000]

If you can, Post the width of your frame. Also post a picture of the brackets on the outer bunks so he knows what to buy.

I'll post those specs in morning after my Giants try to not embarrass themselves

 

[DAG]

I love my single trailer conversion. Its a Triton that I bolted 2 4x4's across to act as out riggers for the 2x4 ski bunks to bolt onto. The trailer is very small which i like so the skis sit overtop the wheels and I've been trailering hundreds of miles this past summer with just 1 ski on the trailer while the other ski is getting a maker over. I was nerviness at first but haven't ran into any issues. If i were to do it again I would make the center bunks on each set a bit closer to each other so i could run 1 ski right down the middle or 2 up on the out riggers. Because of the wooden 4x4's I can also bolt all my eye bolts thru it and get all my tie down strapping points perfect. And there is just enough room for a 3 up fuel jug rail. For the size you cant really beat it. I'll have it at SFF in a couple weeks if you want to look it over.