Freestyle 96 rn winter build and nose job
- Thread starter txsuperjetfreak96
- Start date
- Location
- amarillo ,tx
Thx man just gotta wait for glass to show reinforce engine bay put tubbies on then ill b pretty close for paint
- Location
- amarillo ,tx
Tubbies getting installed got ls epoxied on it was a messy project
- Location
- wichita, ks
almost finished
- Location
- amarillo ,tx
I got started on reinforceing on the inside, filled the bond line in with 2 part then put a 6" strip of 12oz biax, then some cf on the sides, also some goodies ive gotten
- Location
- amarillo ,tx
Got some more cf laid on the other side
- Location
- wichita, ks
you are getting better and better at laying stuff
- Location
- amarillo ,tx
thx it seems like I am, I did this side all in one piece, besides 2 pieces like the other side, I did the 6" strip of biax over the bond line at the same time 2, got this side glassed twice as fast, if I had to do it all over again I would have reinforced the inside while I had the exhaust tube out, that was real pita glassing under it, im not looking forward to glassing around the motor mounts and all the other mounting locations. but oh well gots to get done.
- Location
- amarillo ,tx
Got the nose smoothed out, waiting for guide coat to dry so i can block sand it, to c if there r any low spots
- Location
- amarillo ,tx
Ffh installed
- Location
- Up side down
It's been a while since I've checked on your built, I see you invested even more time as well as a lot of money.
Hope you be ripping soon!!
Hope you be ripping soon!!
- Location
- amarillo ,tx
Lol yeah i have still have a few mor parts to invest in, intake mani, steering, prop, lil odds and ends get my head and exhaust powder coated, been sand bout ready to start spraying some primer filler
- Location
- amarillo ,tx
Lol no i dnt, getting closer to wrapping it up, more work than i expected then life and work gets in the way
- Location
- amarillo ,tx
U ever get your motor going
Ur dedicated! Yes I have ! And man I bet u miss riding !?!?!!
- Location
- amarillo ,tx
Yeah i do, trying to get this thing going for the summer and get an am hull this fall
BruceSki
Formerly Motoman25
- Location
- Long Island
All that work to buy an aftermarket hull anyway?!?!?!?
- Location
- amarillo ,tx
Lol yeah will c or a bigger motor, c how she does with the cpt 771 and mag pump
BruceSki
Formerly Motoman25
- Location
- Long Island
I can flat water roll my 771 fixed steer with Solas mag. And it's waterlogged and heavy. You'll have fun on that boat once its done.