Superjetter_95
Looking to the sky
- Location
- League city tx
well here it is finally! i finally decided to cut into my project after its been sitting since the summer. so here is my winter build!:bananajump:
Hull is a stock 1991 Sn with no extras
motor is a stock 61x
pump is a 144mm with trim nozzle
my plans are to:
-Cut the gunwales down
-cut the hood down to make the lines run together
-cut down the nose to make it rounded
-cut 2" off of the rear of ski
ill probably have alot more in store for the ski, but this is what ive got for now.
this thanksgiving week ill probably finish most of the body work so ill keep everyone posted
enjoy! :cheer:
i started by making a template out of cardboard for the cut i wanted to make on the gunwales then used a jigsaw and saws-all to cut the section out.
this ski sat for most of its life so the inside was dry as a bone!
the plan is to get some 2 part 2lb foam and set it on the gunwales so i can shape them into what i want them to look like, then fiberglass them to my liking.
Hull is a stock 1991 Sn with no extras
motor is a stock 61x
pump is a 144mm with trim nozzle
my plans are to:
-Cut the gunwales down
-cut the hood down to make the lines run together
-cut down the nose to make it rounded
-cut 2" off of the rear of ski
ill probably have alot more in store for the ski, but this is what ive got for now.
this thanksgiving week ill probably finish most of the body work so ill keep everyone posted
enjoy! :cheer:
i started by making a template out of cardboard for the cut i wanted to make on the gunwales then used a jigsaw and saws-all to cut the section out.
this ski sat for most of its life so the inside was dry as a bone!
the plan is to get some 2 part 2lb foam and set it on the gunwales so i can shape them into what i want them to look like, then fiberglass them to my liking.