Dream Parts

[nikad58]

1. A sealed air box..
A sealed air box on the carbs (carb) with a 2" air intake hose that runs to a big box that has a scupper valve at the bottom to let the water out, with another intake hose running up the pole.

2. Dry Clutch.
A small (shifter cart style?) dry clutch to take the place of the coupler at the mid shaft with a handle on the bars.. Now that would really be fun !

3. Air tank for subs ?

I just thought I would throw this out ad see what anyone else is thinking we can use !

 

[D-Roc]

retractable tow rope for the back of ski above the pump.

 

[GIL]

OR-u could just go ship some people their parts. LOL (preferably improperly packaged if at all possible).

 

[MADMAT]

How did that puppy come out? What sauce did you use?

 

[DaUpJetSkier]

a simple but strong locking pole, so you could mix between a fixed steer and pivoting pole ski.

 

[CRKarter99]

I have a ton experience with go-kart clutches. A dry clutch would never work dry clutches are not designed for long term abuse. When I race a dry clutch lasts only about 2 weekends. Wet clutches preform much better of over extend periods of time. A shifter kart clutch is basically the same thing as a motorcycle clutch in fact the 1st shifters were modified cr125 moto engines. There are also simple centrifugal clutches but they dont offer very good part throttle performance.

 

[Scorn800]

cd player and a cup holder

 

[SXIPro]

Quick disconnect tubbies, held on with 1/4 turn fasteners.

Adjustable length ride plate.Probably better for Kawi guys(especially 750s)

Instant Nerf-morphing. So if you are about to land on your ski, or vise-versa, it instantly turns to Nerf material.

 

[D-Roc]

well if we are really dreaming, a turbine powered superjet complete with afterburners. pull the trigger and really fly, like away, for like ever. whooooshhhhhhhh!

 

[Laserman]

I can make you an air tank system that has a float switch so when you sub and the water gets to a certain point the air would turn on. Probably work good if it didn't blow the hood of the sucker!

I want a handleple made from a big spring - it would have a little give, but be unbreakable. You could use it to lauch you onto the hood.....

 

[cookerq62]

2. Dry Clutch.
A small (shifter cart style?) dry clutch to take the place of the coupler at the mid shaft with a handle on the bars.. Now that would really be fun !

can use !

I see what your getting at. Why not a variable exit nozzle to that opens up as you squeeze the lever. That way you could get the revs up at low speeds or pull it quick to "clutch" it up. You could probably get the same effect by having a bypass valve before the exit nozzle so you could reduce the pressure in the pump by opening it to gain revs then close it fast.

 

[DangerBoy]

My new Air box (if I ever get to ride again )
no scuppers though

 

[DAG]

Auto-tune carbs

 

[RiverRat]

Auto-tune carbs

Bullet proof throttle body injection would be nice! :cheer2:

 

[crammit442]

My new Air box (if I ever get to ride again )
no scuppers though

That's gonna break the manifold or carbs when your motor starts shaking good.:wink: Better have a VERY solid bracket made. That's like 24" rims for your jetski!

 

[D-Roc]

or digital fuel injection system with egt sensor.

 

[wetjet701]

They already make an adjustable ride plate think it's Wamiltons
Auto adjustable exit nozzle would be sweet

 

[DangerBoy]

That's gonna break the manifold or carbs when your motor starts shaking good.:wink: Better have a VERY solid bracket made. That's like 24" rims for your jetski!

It weighs less than stock

 

[63chevyll]

a beer holder

obd ll scanner and check engine light for strokes

 

[Shrivel]

A seat ;-)