Dream Parts

nikad58

1974 YZ 701
1. A sealed air box..
A sealed air box on the carbs (carb) with a 2" air intake hose that runs to a big box that has a scupper valve at the bottom to let the water out, with another intake hose running up the pole.

2. Dry Clutch.
A small (shifter cart style?) dry clutch to take the place of the coupler at the mid shaft with a handle on the bars.. Now that would really be fun !

3. Air tank for subs ?

I just thought I would throw this out ad see what anyone else is thinking we can use !
 

GIL

Power In The Hands Of Few
Location
Cullman AL
OR-u could just go ship some people their parts. LOL (preferably improperly packaged if at all possible).
 
I have a ton experience with go-kart clutches. A dry clutch would never work dry clutches are not designed for long term abuse. When I race a dry clutch lasts only about 2 weekends. Wet clutches preform much better of over extend periods of time. A shifter kart clutch is basically the same thing as a motorcycle clutch in fact the 1st shifters were modified cr125 moto engines. There are also simple centrifugal clutches but they dont offer very good part throttle performance.
 

SXIPro

JM781 Big Bore
Quick disconnect tubbies, held on with 1/4 turn fasteners.

Adjustable length ride plate.Probably better for Kawi guys(especially 750s)

Instant Nerf-morphing. So if you are about to land on your ski, or vise-versa, it instantly turns to Nerf material.
 

D-Roc

I forgot!
well if we are really dreaming, a turbine powered superjet complete with afterburners. pull the trigger and really fly, like away, for like ever. whooooshhhhhhhh!
 

Laserman

World's Fastest TYPHOON
Location
Orlando, FL
I can make you an air tank system that has a float switch so when you sub and the water gets to a certain point the air would turn on. Probably work good if it didn't blow the hood of the sucker!

I want a handleple made from a big spring - it would have a little give, but be unbreakable. You could use it to lauch you onto the hood.....
 

cookerq62

Life's Been Good
Location
Upper Bucks, PA
2. Dry Clutch.
A small (shifter cart style?) dry clutch to take the place of the coupler at the mid shaft with a handle on the bars.. Now that would really be fun !

can use !

I see what your getting at. Why not a variable exit nozzle to that opens up as you squeeze the lever. That way you could get the revs up at low speeds or pull it quick to "clutch" it up. You could probably get the same effect by having a bypass valve before the exit nozzle so you could reduce the pressure in the pump by opening it to gain revs then close it fast.
 

DangerBoy

Runs with scissors
Site Supporter
Location
Rincon Beach
My new Air box (if I ever get to ride again :mad:)
no scuppers though
 

Attachments

  • CIMG0452.jpg
    CIMG0452.jpg
    109.6 KB · Views: 84
  • CIMG0453.jpg
    CIMG0453.jpg
    118.4 KB · Views: 83
Top Bottom