Krashindustries.com is selling 997cc RTR Skis for $12,000.00

[cpolaris502]

See if these facebook video links work...

https://www.facebook.com/video.php?v=10155713669106367

https://www.facebook.com/video.php?v=10155713669461367

 

[TheBuzzard]

i just came across a 50 cal RTP vid by krash on facebook. somebody from japan bought one and was throwing down flatwater and surf. looked like it had plenty of power for surf and just enough power to do a little something something on flat. i'd get one if the bugs were worked out and it was reliable for any length of time. have you guys seen that vid?

 

[Quinc]

i just came across a 50 cal RTP vid by krash on facebook. somebody from japan bought one and was throwing down flatwater and surf. looked like it had plenty of power for surf and just enough power to do a little something something on flat. i'd get one if the bugs were worked out and it was reliable for any length of time. have you guys seen that vid?

This guy:
https://www.instagram.com/takaakimurao/?hl=en

He also flat water flips a js550.

View this content on Instagram

View this content on Instagram

 

[bird]

This guy:
https://www.instagram.com/takaakimurao/?hl=en

He also flat water flips a js550.

View this content on Instagram

View this content on Instagram

that doesn't sound like a piston port, sounds like a 701?

 

[Big Kahuna]

That is far from a basic 701!

 

[Quinc]

that doesn't sound like a piston port, sounds like a 701?

Everyone knows you just take out the waterbox to unleash braaap!

 

[cpolaris502]

The last month on this thing has been awesome. I think I've gotten through most of the "new ski" hickups finally and have been just flushing fuel through it now. It's running awesome and handles so good. Bone stock RTP at 19hrs.

We had a Thursday evening V wake session last night. Video by @KMN

 

[Haritza]

Hola.mañana recibo un krash rt¿cuales serian esos pequeños preblemas que puedo encontrar?

 

[adamp]

can people share what screw settings they are ending up with on the carbs trying to get my reaper dialed in thanks!! other than her running super rich right now loving the ski!!

 

[Parsonsjb88]

can people share what screw settings they are ending up with on the carbs trying to get my reaper dialed in thanks!! other than her running super rich right now loving the ski!!

I'm at 5/8 on the low and 1/2 on highs. Still a tad rich but any leaner and it stalls when I WOT from idle.

Sent from my ONEPLUS A3000 using Tapatalk

 

[adamp]

awesome thanks !

 

[adamp]

try opening your idle screw a little

 

[Parsonsjb88]

try opening your idle screw a little

So lower the idle or increase? I tried tinkering with idle speed the other day and seemed to make it worse

Sent from my ONEPLUS A3000 using Tapatalk

 

[adamp]

well its reverse jetting so more fuel going in motor at idle so if you open your throttle plates or increase idle it will help offset low end rich condition reverse jetted skis usually need to run a higher idle

 

[Blaqk]

I'm at 5/8 on the low and 1/2 on highs. Still a tad rich but any leaner and it stalls when I WOT from idle.

Sent from my ONEPLUS A3000 using Tapatalk

Only 1/2 and 5/8 wow they sent me the recommendations and it was higher I'm gonna give what you got a try though because they are rich for sure.

 

[cpolaris502]

Have you messed with the upper pipe screw very much? It actually does quite a bit with tuning. I can go to two different lakes that are different temps and usually just tune it in with the pipe.

 

[cpolaris502]

 

[Bro]

Great video! You make it look easy.

 

[TheBuzzard]

that thing just doesn't sound that great. it does not sound like a beast

 

[Citizen]

that thing just doesn't sound that great. it does not sound like a beast

I really want to ride one, but yea...it sounds liked a bpiped 701 in the videos. And have yet to see any good flatwater footage. Mostly big boat wake flips. Not knocking it, just was expecting more out of 997ccs