Not another Chan, build.

[DirtKurt]

Finally got the e-box fully wired! Flame ts2, new oem kawi coil, ocd wires and raddudes box. Just waiting on the files from ATP to reflash and its done.

 

[DirtKurt]

Mini update. ATP Flame reprogramming was a success. Also got the first filler piece for the intake grate cut and fitted.

 

[Pablo]

I like that filler piece. What's it made of?

 

[DirtKurt]

Polyethylene from mcmaster. 1" thick 4x12 block was like 6 bucks

 

[Draggingto]

Looking good, are the pieces necessary when not running a grate?

 

[DirtKurt]

The front one probably isn't necessary, but the rear one your gonna want. I think there a good chance you will rip your rideplate off without it.

 

[TheBuzzard]

you dont need anything front or rear. my rokr has nothing and it has the flimsiest rideplate known to man on it.

 

[DirtKurt]

Your probably right, but either way it didn't seem very hydrodynamic to have that little wall under there



Plus I spent so much time blending the pump shoe and tunnel it seemed a little silly to cut a corner here.

 

[Draggingto]

You want to make two more lol.

 

[DirtKurt]

You want to make two more lol.

These were an absolute pita to make, but if you want to send me a bandsaw and a belt sander ill whip you up a set

 

[DirtKurt]

Finished the rear filler piece today, just have to countersink the bolt holes.

 

[pepperson4]

We'll I've ripped my plate off. I reinforced it and silicones it and it's still pulling through on the bottom bolts.


Sent from my iPad using Tapatalk

 

[zzylstra]

We'll I've ripped my plate off. I reinforced it and silicones it and it's still pulling through on the bottom bolts.


Sent from my iPad using Tapatalk

I got a super thick plate and never had to run the bottom bolts again because they kept coming out. Needless to stay I can't express how happy I am to be going back to a normal plate with no worried

 

[Pablo]

Get wide, dome top (pan head) Allen head bolts to fit those holes and supplement with washers that are another 1/4" larger diameter than the head. My first chan had a ride plate issue like that but Steve sent me another ride plate that was thicker for that chan. My second chans ride plate seems to fit better. I used the above bolt setup without issue.

 

[DirtKurt]

My plate is thick, all carbon and extremely rigid. Hopefully I won't have any issues. I'm using pan head allens with washers on the sides and flat head countersunk on the bottom.

 

[DirtKurt]

Made some more progress this weekend. I can almost smell the cam2 now...

 

[SmittySX]

Nice attention to detail. Good, clean work.

 

[Pablo]

Looks super sano homey. Nice!

 

[jeastes1]

Very nice build! I rode a chan for the first time today.

 

[DirtKurt]

Very nice build! I rode a chan for the first time today.

Thanks, You've already got me beat I have'nt even ridden one yet lol