Other option for long exhaust hose superjet

[sharistove]

i will take one, please call 818 519 7172

 

[ncbrock]

that abs is a good idea. I have to rethink my exhaust over the winter

 

[Liquid Graffix]

ABS works great! Been running it all summer with no issues. A bit louder than stock, but I think it sounds cool too.

 

[Bobert540]

How hard is it to get the gas tank in and out?>

 

[Idok]

go with the jetmaniac solution......couch parts FTW!

 

[THRUST]

yea the hard exhaust by the fuel tank sucks it makes a nightmere out of getting the fuel tank out . I had to do it on a trip i was on to fix an exhaust and of course we had to remove the tank a few times and we were saying some bad things .
yea the wave 3 is almost perfect go with chris or go with a long arm 45 degree 12" this will give you enough to deal with the fuel and then run a rigid .

 

[Liquid Graffix]

How hard is it to get the gas tank in and out?>

I haven't had any trouble getting the tank out. Then again, I don't remove the tank that often. It has a 90 degree elbow at the water box and a coupler where it meets the through hull tube so there is some play to get it out of the way. I'm sure there are better ways to run it, but I'd rather spend the extra $ on fuel to ride more!

 

[Motorheads5]

go with the jetmaniac solution......couch parts FTW!

Yep Jetmaniac has the best value and also a great seller and yes it is a bitch to remove the fuel tank if you either use a pipe to splice 2 hoses together or any ridgid pipe.
Good Luck

 

[vomitspot]

glad this was dug up , i need a rn hose and have a wr3 on it way to the dump might just snag another part before she goes , guess it pays to be a slacker sometimes

 

[loictahiti]

waverunner 3 hose

I don't think so, WRIII has a thru hull elbow exhaust , the hose is straight , if not tell me witch model, i'm interesting

 

[BruceSki]

wr 3 hose works well. You have to cut it though.

 

[loictahiti]

wr 3 hose works well. You have to cut it though.

they have same shape, with elbow ?

 

[BruceSki]

yes it is very close to the same shape. just slightly different.

 

[loictahiti]

ok thanks

 

[CarterB]

what and how to find that black plastic one from lowes????

 

[Th3g3rm4n4t0r]

Still ok to use PVC or ABS after the waterbox on a SN with a PFP? Dont want to spend more money than i have to! Saving up for a enhancer from Jetmaniac

 

[Quinc]

Rad dudes sells a silicone exhaust hose for 100$. The ABS price looks pretty good though.

 

[mike b]

Still ok to use PVC or ABS after the waterbox on a SN with a PFP? Dont want to spend more money than i have to! Saving up for a enhancer from Jetmaniac

You have a SN with a PFP pipe? this is must see!! I think you ment the FP but just incase you really ment the pfp that would be something new to see. Great thread, Ive wanted to try aluminum tube but ABS sounds cool and maybe ill heat it up and throw some slight bends in it

 

[Th3g3rm4n4t0r]

Not sure why its a must see lol, its actually rather depressing i have it in a SN. Looking at getting a better hull in the fall. Anyways, 760cc .25 over, ported, running 38cc domes @ 180psi on a ADA Girdled Head, ATP Single Intake, Reed spacer, V Force 2's, 49mm Full Spectrum Carburetor, Power Factor Pipe, MSD Enhancer

 

[DAG]

You have a SN with a PFP pipe? this is must see!! I think you ment the FP but just incase you really ment the pfp that would be something new to see

DASA 1000 with PFP in a SN. Worst idea I have ever had. Wish I went AM hull and stock motor.