RRP FS-1 (World Final Preview)

Roo

Roo

it's all good
Site Supporter
Location
Lake Orion, Michigan
skinnyman said:
thanks

looks like a tight fit

the price is right may have to pull the trigger on that bad boy
Click to expand...



Spend spend spend baby!

Get this economy going - thats my take on it :smokin: just don't rack up credit card debt!

That being said, I want to see how this winter treats me, and I might splurge in the spring. I'm hooked.
 
THRUST

THRUST

ThrustInnovations.com
Location
royal palm beach florida
just a fyi there is not one eme with a crack the hood or a liner seperating . but by far the fit and finish of the rrp boat is the best in the business ,as is the hydrospace . malone would say the same . eme is building all of its engine in house now and mark will be building engines himself . the emes are also available in 1105 ,1000, 900 in the powervalve cylinder and 800 in the octane cylinder . three out of the four were sold by the end of the weekend with an additional hull to one customer . these were all a quick run of boats just made in time for the finals as was lenzi duck tape boat .
 
yamaslut

yamaslut

kill it
Location
Daytona Beach, Florida
Virgin said:
just a fyi there is not one eme with a crack the hood or a liner seperating . but by far the fit and finish of the rrp boat is the best in the business ,as is the hydrospace . malone would say the same . eme is building all of its engine in house now and mark will be building engines himself . the emes are also available in 1105 ,1000, 900 in the powervalve cylinder and 800 in the octane cylinder . three out of the four were sold by the end of the weekend with an additional hull to one customer . these were all a quick run of boats just made in time for the finals as was lenzi duck tape boat .
Click to expand...


I saw the hood and yes it was.... why are you calling me out when you have no clue what I looked at??? They looked cheap and the liner was separated. I just call it like I see it. I have no reason to make stuff up.
 
THRUST

THRUST

ThrustInnovations.com
Location
royal palm beach florida
yamaslut said:
I saw the hood and yes it was.... why are you calling me out when you have no clue what I looked at??? They looked cheap and the liner was separated. I just call it like I see it. I have no reason to make stuff up.
Click to expand...

what you probably saw was the tape lines from glueing it kind of looks like it is seprated in fact i douuble checked a couple spots myself due to this . just called it out because i worked with eme all week and there was no problemn with any of the hoods all week or when we packed up . i inspected the boats to see if any repairs were needed before we shipped so . the fit and finish is not the rrp but there were no problemns after the poundings they took all week . by the way i wasnt attacking you just the comment . i think you could ask all four riders on that they are the most hood eme has made to date . function before fashion is all. besides most of the sj hoods i used to buy were sperated before i even installed them due to poor quality adhesive and they are probably the biggest company out there
 
Last edited:
THRUST

THRUST

ThrustInnovations.com
Location
royal palm beach florida
Idok said:
those rails are going to add MAD stability...why would you want to shave them off????


I think that fs1 is sexy as hell....
Click to expand...

if you cut the rails on the rrp you just destroyed your boat . the rails were put there after testing the boat shotrtened without them . they dramatically improved the handling and the stability . without them you would have just another squirlly boat
 
IKSTEJ

IKSTEJ

BOGIE
Location
Region 7
just for reference, we have Nacs World Champion 900cc Carbon FS-1 for sale .... if anyone's interested :)

i stole the pics from the earlier post :)
 

Attachments

  • Nutz.jpg
    Nutz.jpg
    86.5 KB · Views: 150
  • Nutz1.jpg
    Nutz1.jpg
    96.2 KB · Views: 152
yamaslut

yamaslut

kill it
Location
Daytona Beach, Florida
Virgin said:
what you probably saw was the tape lines from glueing it kind of looks like it is seprated in fact i douuble checked a couple spots myself due to this . just called it out because i worked with eme all week and there was no problemn with any of the hoods all week or when we packed up . i inspected the boats to see if any repairs were needed before we shipped so . the fit and finish is not the rrp but there were no problemns after the poundings they took all week . by the way i wasnt attacking you just the comment . i think you could ask all four riders on that they are the most hood eme has made to date . function before fashion is all. besides most of the sj hoods i used to buy were sperated before i even installed them due to poor quality adhesive and they are probably the biggest company out there
Click to expand...

that's cool we can agree to diagree... It doesn't really matter to me, cause I will never own a EME boat....
 
swanny

swanny

not safe for clowns
Location
portland
yamaslut said:
that's cool we can agree to diagree... It doesn't really matter to me, cause I will never own a EME boat....
Click to expand...

I'd like to know where they came up with that design though. Ive seen and heard about another one that is almost exactly like it. :scratchchin: kinda makes ya wonder.....
 
You must log in or register to reply here.
Top Bottom