Freestyle Solas SS 'Mag' Nonsetback 144mm pump REVIEW

[JetManiac]

Freestyle cone option is now available for these pumps. Also make sure to install oem dowel pins between solas pump and wear ring.

 

[XJCrawler]

Are they the impros ones?

 

[Sanoman]

Freestyle cone option is now available for these pumps. Also make sure to install oem dowel pins between solas pump and wear ring.

Who in the heck would do something like that................

 

[Polish jet pilot]

I had to drill additional holes to do that..no biggie...

 

[mxmark4]

Ok so I got mine into my SN,with a 9/15 hooker and finally got a chance to try it out Yesterday,its a big difference for sure. When siding out to do 180s, I could feel it hook up much quicker than my old pump.Top end on the ski was big differnce as well acceleration was crazy fast and makes me want my long skegged rideplate back.On the bottom end ski is got some mad hops it will literally blast up out of the water in a way that makes the old pump feel like it was designed for infants to ride with. Heres the bad of it,The ski hooks so good now I was beat up and worn out by the end of the day.My setup is not even that strong,61x with pro tec pipe,head,and ocean pro vortex FA, so I can't imagine how this hits with a real setup or a BB in it. Any body considering this mod should definitely go for it, this pump is worth it for sure.

 

[txsuperjetfreak96]

sweet im just waiting on mine. same engine set up 61x 62t. all the bolt on goodies in my signature

 

[stefan]

Thanks that is the same prob i Will be running in my 718 maniac engine. Dit you have too put a spacer behind the hooker ???

 

[KTM434]

I've been waiting 6 months for a Solas mag!! I want 2 but I havnt tried the first one yet!

 

[mxmark4]

Yeah I am running two spacers behind my hooker.

 

[txsuperjetfreak96]

Ic I've been waiting since end of march

 

[raytherace]

Yeah I am running two spacers behind my hooker.

me too

 

[XJCrawler]

Have you guys tried Jetworks? Art was suppose to be getting some in the at beginning of April

 

[txsuperjetfreak96]

i went through jetmanic.

 

[mxmark4]

I bought mine new never used from a member here, and the only reason I got it was because I lost out on a nice b pipe deal and had a wad of cash burnin a hole in my hand.

 

[KTM434]

Haha. I have a big bore in my B1 and wanna put my billet Able stroker motor in it but I wanna test the Solas mag behind my big bore first! This waiting thing sucks but Skat mags are sooo much more money and I have multiple skis so I'd like to grab a couple Solas mag pumps

 

[alan]

Has anyone had issues with the prop binding up on the hub I fitted the standard Yamaha spacer and tightened up the prop but when I got it in the water the prop bound up now I have to cut the prop off

 

[Superjetjim]

Solas v Mag - perhaps a similar conundrum!

http://www.youtube.com/watch?v=omAwEPbHmV0&feature=youtube_gdata_player

 

[Polish jet pilot]

Has anyone had issues with the prop binding up on the hub I fitted the standard Yamaha spacer and tightened up the prop but when I got it in the water the prop bound up now I have to cut the prop off

I did, my prop was -3mm and I needed to add another washer.. it's perfect now...

 

[alan]

How thick were the two washers you used I swear the prop was tight but now it's jammed

 

[Polish jet pilot]

I got a washer from Jetmaniac, but due to the fact my prop was cutback, I added another one, which was about 1.5mm...just don't tighten till you are sure you are clearing the vanes