Search results

check out www.ozfreeride.com as well theres some good couch action there as well. Matty

Cheers mate, I am running the stock air box so yeah I'm thinking it maybe the needle & seat. Matty

Hi All,, got a funny problem eith my sj, and was wondering if anyone could point me in the right direction. Firstly the setup: stock motor with limited "B" pipe, jetting as per FP instructions (wax has ridden the ski and jetting is OK) the problem occurs on the second tank of fuel...

without pics this post is :spam:

That would be Pete, SHARKY on here. Cheers Matty

stock thread size of steering stop is M10 x 1.25mm, standard M10 thread is 1.5mm pitch you either need to tap out a M8 eye nut or change the steering stop. Cheers Matty

Jaguar use it to fix there body panels these days no more spot welds, have also seen a bonnet scoop on a drag car fitted using this stuff as well as a roof repair where the panel was glued in place with this stuff. All I can say is make sure you get your parts in the right place FIRST time...

Hi All, After seeing vids and pictures of guys riding all over the place thought I'd start a thread for everyone to show off there riding spot/s with google earth nowdays we have the technology. So to start things off here is where I ride on the Gold Coast of Australia, the area marked...

yeah mate take it to a toolmaker or find a machine shop with an EDM/Sparkeroder they'll burn the ezout & bolt out for you in no time it is the safest way. If you still want to have a crack at it get a good masonary drill (ARTU if you can get them) in a drill press if possible 1000rpm and only...

Hi Guys, a few things i noticed about the 07 X-2 not that I have owned one but one of my ride buddies used to have one. They are chit in the surf not as far as riding goes but you would have more luck keeping water out of the tray of a superjet than the motor compertment of an x-2, out of 6 -...

My missus wishes I didn't either:shrug:

I have recently done a bit of work with the 8 & 25mm plush and have 2 tips that made working with it easier, for cutting use and electric carving knife just don't t try to push to hard. for shaping i found a "flapper" wheel in a die grinder the best see picture. Cheers Matty

Hi Cambo, Nice shot you guys going big as usual. Cheers Matty

Hi Mate, You should be able to make some bars yourself pretty easy. I have made a set myself, like you said 7/8" solid ally bar 6061 grade t6 temper is the optimal but can be hard to get in round bar if not 2230 is fine, cut it to length 650mm approx, if your not running caps on your grips...

Hi Griggs, I know the feeling mate, I have an 07 and it is my first stand up. I had EXACTLY the same problem, the weight shift helps alot but I found the worx 205 intake made a WORLD of difference to the ski. I put that intake and a solas 13/17 concord prop a couple of rides later and would...

Hi Mate, in brissy myself mate, go to goodtime at the gabba they will have them there just windsurfing footstraps. Cheers Matty

thanks for the replies guys. LBE: yeah mate I'm a short a** only 5'9" but from what you guys have said if setup right I shouldn't have the problems I on that ski yeah? Cheers Matty

Hi All have a few questions regarding footholds after riding a ski fiited with them for the first time on the W/E. Foothold were richters others might not have the same problems? the two main problems were 1: they seem to far back, they appeared to be in the same position as most pics...

Thanks for the welcome guys. Footholds & bilge are going in in a couple of weeks just got to stop riding so I can do the work :) and try and explain to the wife why I need to cut 2 big holes in a brand new ski:banghead:, will post some pics when done. Cheers Matty

Just a quick post to introduce myself guys, names Matty from the gold coast of Australia .Been lurking for a while after finding the site thru PWC today I have to say what an awesome site. I have recently bought a new 07 superjet and the techFAQ's are priceless not that I have done much yet only...