Search results

carb tuning issues during break in? what is it not doing to warrant tearing the carbs down before its even broke in?

ive broken tom21 sponsons - they are a very thin layer of fiberglass filled with 2 part foam. Also the left and right sponsons were not identical they were trimmed differently? can't remember the exact fitment issue ,but they were off. I tested destroyers vs Pro Watercraft for SXR. Went with...

did he ever try a half stroker? there are a few tuners out there that can get a limited superjet to go 58 and a limited SXR to go 60, but don't expect the engines to last long. for the rest of us 55ish is the best we will ever see on a limited legal ski but it hardly matters because the class...

what he said

1350.00 for the block midshaft and housing - 100.00

I have the impeller, the couplers, the engine minus carbs / intake

I disagree, these are professionals competing for big money at kings cup. It matters who wins.

#markgomezgetspreferentialtreatmentfromcarburetors The move is puzzling. He should just save it to the very end of the competition and only do it if he needs to

the older superjets are perfect for surf skis, but the 08+ is still surfable and will smash all over the older models for regular rec riding.

theres a guy on here that builds lites set-ups. he sells the cylinder kits on here. im pretty sure he stocks all the different headgaskets and has all the answers you are looking for. im not sure if he gives the info away for free though

Short block 1350

Bump

Carbs/intake sold

the top leg of the tee received no water

Everything I learned in school was a lie

Pressure in fluids at rest Fluid pressure is most often the compressive stress at some point within a fluid. (The term fluid refers to both liquids and gases – for more information specifically about liquid pressure, see section below.) Fluid pressure occurs in one of two situations: 1.An open...

that is incorrect ^^^

the leg of the tee connected to the valve does not affect operation

short poles are for short people and short hulls. you wouldn't need to cut the tubes. the tube design allows for a few inches of adjustment. I used to run a rrp pole with std tubes at max adjustment on a lites sxr

Bump