Search results

I am wondering if the person who installed this exhaust cut out the water jacket holes in the manifold to head pipe gasket. If I shoot air into the cooling fitting on the head it comes out the all 3 of the head pipe fittings. I was under the impression that water enters the exhaust manifold...

I just bought a 95 Waveblaster with a 61x, ada head, flow control valve, and what I belive is a Coffman sizzler. I have read a few posts on here regarding the correct routing with this setup, but can find info only when dual cooling is set up. I will go dual after the summer is over, but for now...

I have a blaster with umi steering and blowsion handlebars. I just bought a jettribe cover not thinking about the wider bars and not the cover won't fit my setup. What is everyone doing when this happens? I was thinking about buying a damaged cover from jettribe and cutting it up to add to the...

I know this is an old post, but I am in the same boat and cannot find any info on how to fix this. Anyone have any ideas or know where to find the brass insert?

The Rolls-Royce of wifi: http://www.ruckuswireless.com/

I have a billet rrp on my superjet. I thought the stock chinpad was an option, but now I realize I will have to buy a different one. Im stuck between the rrp pad or the thrust pad. I am looking for a quality built pad, something that matches the quality of the billet handpole. I'm sure the rrp...

I read somewhere that a stock superjet chinpad will work with the billet Rick roy hand pole. I tried to bolt it on last night but it was way off. The steering cable is in the way of where the pad mounts to the pole. plus the two bolts provided with the billet spacers are too short. Hopefully, I...

Hit the "reply with quote" button.

I would suggest putting it in an otterbox inside the foothold, not just inside the hold. Water will definitely work it's way into the foothold.

I would cancel payment and go buy a wamiltons or blowsion hood. I just ordered a wamiltons hood and it is being shipped out right now.

Anyone running a strap and stock latch on a sj? Got any pics to post?

I bought a plate for it. That will fix the problem.

They are tau ceti tornados.

Is there a spacer from intake manifold to the case that would bring the filters further away from the head?

I'm thinking that the vibrations will tear up the filter

flame arrestor rubbing head

Thanks for the responses everyone. I guess I'll glass over and cut out a turf patch for looks.

There are 2 holes leading into the tray area on the left and right of the e-box. These holes are covered by a sticker. I think wamiltons has an insert that gets glassed in, to seal these holes. Anyone have and other info or better yet some pics and a link to where I can buy a set of these.

Your pm box is full