Search results

Working on our 1100 SXR. About every third time you hit the start button you just get a click and it getting worse. Checked the easy stuff first, start stop switch with an ohm meter and works perfect. It's clean inside and connector checks out fine. Both the battery, cables and all...

Thanks, same jetting as you recomended above? I'm at 700' above sea level.

Not get the original post off track, but I'm curious; Does a 701 with good cylinder porting, minor case porting, ADA head 180/180, V force reeds and a ported mod pipe benefit much from switching the stock 38's to Yamaha's 44's off a 760?

Based on info I saw in another thread, a Kawasaki 1100 complete is 189 pounds.

I'd like to get peoples thoughts on freshening up an engine before listing it for sale. Our Dasa 1000 has served us well and is a great engine, but we are stepping up to a 1200, so we need to sell the 1000. We have Dasa go thru it every 50hrs of use and even though it still has 180/180...

I have a spare I'd sell if you need it, brand new in the box. Send me a PM if interested.

Stepping up to a Dasa 1200 from a Dasa 1000 this year in the XFS. Who's done it? Any issues or just hang on and enjoy the power increase?

I'm in the midwest and same thing here, no customer service. I ordered a new front door in Nov and it's still not in. I get it, supply issues and all, but at least return my call when all I want is an update on the ETA.

Who makes SE carbs and where are they located? Contact info?

I call Hitch Hauler and answer is too much leverage to extend it. But they say you can still get one in the bed and one on the hitch. He says, you take the tailgate off, put the ski in the bed way over to one side, then have the ski on the hitch facing so the ski in the bed's pump is over the...

Not to change the subject, but I wonder if you can put one in the bed with an extra long Hitch Hauler to clear the lowered tailgate with the 2nd ski? Maybe too much leverage with a longer Hitch Hauler?? Any one ever do this?

I was going to get an electric winch and mount it in my attic above my garage to lift skis off trailers, stands and truck beds. It would have worked slick until I found out the manufactured trusses in my garage roof were designed to carry a load on the roof, but not hanging from the lower cross...

Here in the Midwest around the lake we have ethanol free fuel, 87, 91, and 93. I use it in everything from the truck to lawnmowers, chainsaws and skis. I have never had a carb problem caused by fuel. People I know around the country that have no access to ethanol free fuel seem like they’re...

Is the 03 crankshaft different from other years? I have a very nice one from an 08. PM me if interested.

I'm not sure their codes transfer to other paint brands. I may be wrong, but think these are the only people that carry the Yamaha approved colors. https://www.colorrite.com/wizardresults.cfm

I would worry if the amount of foam in your Rickter would float it if it was completely swamped. I added as many pool noodles as I could to the front of ours. We had a lot of water in the hull with our XFS until I got rid of the scuppers and Installed a ball valves. IMO scuppers are great for...

Doesn't JM / Blue do case porting?

Any water gets inside the engine and I would want to get it started ASAP so the bearings and other things don't start to rust. Then ride a tank or so thru it to get all the water out and dry it out.

I found some at the next town over so I'm set. All the local retailers are out around LOTO. I even called NKG and they said they have been out since Feb and have 7,000 on back order. They have no idea when they will get more.

I run them in everything, but with solid tip BR8ES's hard to find are people running 7"s? Any danger with running a tad hotter plug? I tried 9's, but they looked fouled after a few rides.