Search results

my bad

so I guess there is no issues running other FAs including stock

I have "heard" that bjs prefer only round, blowsion air forces shape, ie. proks with flat top (no vortex shape). Hopefully not as my blowsions broke apart several times and I'm tired of fixing them. Can some chime in so I don't have to bother Art or Crammit ;)

If the value declared is higher than $60 us then taxes are paid, duties are paid if the stuff was not made in North America (due to NAFTA) but most of the time they charge it and leave it up to the received to submit paperwork to prove otherwise especially UPS/FEDEX. On bigger packages its...

what octane gas are you running? With the type its recommended to use 37cc dome on pump gas. I used to have a very similar setup but with dual 38s and ripped very hard (still does)

He would be touching the base gasket. only re sealing the cases. I think this is a lot better than blowing the engine and gives him few more weekends, of course all this is assuming that the seals are the only things need of replacing. Of course proper way is to do a full disassemble and...

Since you are fairly familiar with taking complete engines out, take it out, flip it over and replace the seals without disassembling the top end. fairly quick process with removal of the engine being the longest step.

it might be just a visual effect but it looks like the connectors are bent, if so try to get them on flat plane gently, Also try a macro mode on the camera when taking close ups (if it has it)

my old SN now my buddys

2-4mm

I got my first set from chris too but the instructions called for 2 part, don't remember what year but definately a while ago ;)

Great Foam is open cell foam, like a sponge, only the exterior skin thats created during expansion is closed assuming it doesn't touch any other surface and if thats the case there will be a void between it and the hull.

Dega, if they check that often make sure its Canadian Coast Guard approved, USCG will apparently only save you in US ;) Most wont make an issue of US/CDN but if they want to, they legally can

go to napa and get 3 1/2" marine exhaust hose, you will never have a problem again

Its 21st century Al Bundy :loser:

light weight coupler Excellent communication shipped next day, got to Canada in Xmas rush in less than 7 days. Perfect packaging and great product, will install in late spring and report difference. thanks, Adam

depending on how much the pump draws.

why? I have a custom ported (jetworks) 803cc 4mil with a mag 140 and run 14/19 hooker. run a 14/22 but found it too good on mid/high but only ok on bottom. Current prop is perfect for my app but if I can find 14/18 or 13/18 I would try it just to see, although I'm afraid it will rev out too...

thats more like 45 hours @ 100km/h average (or 62mph) plus eating/fillups/etc.

Great job Nick on hooking that up!!!