Search results

Finally got some tray time with my tomski ffh and it rocks! I can get my front foot to lock in just like my back holds do. Super easy to install and really comfortable. I bolted on mine so I didn't have to re-turf anything. Wound up doing some 9mm underpad on the bottom and front then turffed...

I don't mean to thread jack, and I'm sure norcaltrd has a similar question in mind anyway. Any recommendations for a good 4/3 suit? Something flexible enough for ski ridding that isn't going to fall apart or break the bank... I've got a full 5 dive suit and you spend the whole ride fighting it...

Sorry to thread jack a little bit but I'd love to hear some details on the hand/feet warmers! I've tried 3mm gloves and in my opinion those are still too thick...

I learned aboit how amazing surf riding might be (rode 4' rollers withoit a lip in a shallow lake in a wind storm), got comfortable being locked onto my footholds, and made my nose stabs 10x better. Next season I want to spend tons of time in salt and get flat water rolls at least 3/4th of the...

I think we need some sort of vauge/ballpark budget here. When you say save up some money we have no idea if you're talking about saving 3-4k for a JM BB or 12-15k for an xscream 1400...

I'm running a RN hull w/RN pole and I took out 3.5" and am kicking myself for not taking more... I'm 5'8" for what it's worth. Edit: its a pre-08 pole and hull.

I ride out of the Magnuson boat launch once a week-ish and head up to lake Stevens every now and again... Sent from my HTC6525LVW using Tapatalk

Yeah, props headed straight to the recycle. Chip in the wear ring housing is from one of the little tabs on the side snapping off while i was pulling the pump apart. I imagine the stator damage was from whatever took out the prop or a chunk of the prop. I'm just gonna clean it up and...

Somehow I managed to suck something up about 50' from shore, no idea what it was, but it took out the prop and did some minor pump damage. I'm gonna replace the prop but I'm not sure how much damage is too much in the pump. http://imgur.com/a/8wK1O There's some pics to explain what i'm talking...

just to update this thread, i had a 2nd surgery they put 2 plates and 11 screws on my fibula. now i have 4 more weeks of no weight bearing, then i might be able to start PT to walk again... looks like my snowboard season is shot too!

gettin close to bionic, workin on the master plan to slowly replace all my bones with Ti... haha

doin a nose stab off a boat wake while on vacation i had some issues with my footing that resulted in this: gotta love coming out of general anesthesia my knee is actually pointing up here, my foot is just rotated 90 degrees and a few x-rays to show the extent of the damage i had a...

bit off topic and might be a dumb question, but are coupler covers needed? Ive been running my SJ since i got it (bout 8 months) without one...

safety side note, be carefull around the ignition with a CAT II rated meter, the voltages go well above 600v on the plug side of the coil!

well first off your charge coil is out of spec, factory manual says 497.7-608.3 (@68*F) 2nd a spark pulse is not AC(its square wave-ish with a lot of noise and some miss-shaping due the inductance of the coil), so your not going to get a voltage reading off AC switch of a multimeter (you'd...

sounds like it could be the starter motor, the click sounds like solenoid moving the starter gear onto the flywheel... but it could also be something wrong with the wiring going to the motor as well. Just to eliminate the battery pull the plugs and try to start it. idk if this works on PWC's...