Custom/Hybrid Backi-Chan build

[swannysxr]

I'm really diggin the Chan! The first ride on a new hull/build is always the funnest1!

 

[ProSouth]

I must have missed motor/pump setup... ? Nice backie attempts

 

[t.fife]

Are you using the 850 you built to power it?

 

[d_moss]

Yes ss850 Bb

Sent from my HTC One using Tapatalk

 

[swapmeet]

That makes me feel a little better about you almost landing BF's on your maiden voyage... lol...

 

[d_moss]

Went out today went for ten min and it just died. Like I pulled the lanyard. No spark. UN plugged the black white at the ebox. Swapped cdi's. Still no spark. I just put in a oem kawi coil two months ago. When I ohm the black and orange from the coil it says 00 ohms? This normal? Freakin lame. 60s no wind rest of the week and snow on Monday.

Sent from my HTC One using Tapatalk

 

[Matt_E]

Yeah that's normal. Very little resistance in the primary.

Pull the flywheel cover and check for debris.

 

[d_moss]

<object width="420" height="315"><param name="movie" value="//www.youtube.com/v/4LCQmPO_1Ho?version=3&amp;hl=en_US&amp;rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="//www.youtube.com/v/4LCQmPO_1Ho?version=3&amp;hl=en_US&amp;rel=0" type="application/x-shockwave-flash" width="420" height="315" allowscriptaccess="always" allowfullscreen="true"></embed></object>


http://www.youtube.com/watch?v=4LCQmPO_1Ho&feature=youtu.be

 

[subhard]

Damn. You're riding crazy shallow

 

[schicks]

check the start/stop switch, be careful, they can ohm out fine but still have an issue. I chased a similar problem, ski would just shut off at trandom times. You can also turn your idle way down and disconnect the black and white leads of the s/s, you can't shut the ski off when you do this but that is why you turn the idle down...just another way to trouble shoot it.

 

[Matt_E]

check the start/stop switch, be careful, they can ohm out fine but still have an issue. I chased a similar problem, ski would just shut off at trandom times. You can also turn your idle way down and disconnect the black and white leads of the s/s, you can't shut the ski off when you do this but that is why you turn the idle down...just another way to trouble shoot it.

You didn't read his post, did you? (#66)

 

[schicks]

guess i missed that, just trying to help. Maybe he disconnected the wires but forgot to plug the lanyard in when checking spark??...i dunno...only a couple things can cut the motor out like that

 

[d_moss]

I will take the stator cover off. I'm hoping the screws came lose or something and it's an easy fix. Prob not though haha. One plus to a cart tank is it is easy to remove!

Sent from my HTC One using Tapatalk

 

[Matt_E]

guess i missed that, just trying to help. Maybe he disconnected the wires but forgot to plug the lanyard in when checking spark??...i dunno...only a couple things can cut the motor out like that

The lanyard function is disabled when disconnecting black & white.

 

[schicks]

got it. Your right, i confused myself.:notworthy:

 

[d_moss]

After swapping everything in the ebox out I tested the stator....

White/red and ground = 2 volts when cranking

Brown/white and black gave out 4 volts

So I had a new 61x stator and used flywheel threw it in and spark.

So anyone running an x stator with an hx3 epic. ? How do I set the timing with a timing light?

Sent from my HTC One using Tapatalk

 

[d_moss]

Looks fine to me????


Sent from my HTC One using Tapatalk

 

[Matt_E]

I don't think you can run a 61X stator/fw combo with that ignition.

 

[rubbertoe]

Where you running the hx3 ignition when you lost spark ? so let me understand ,it ran fine for a bit then just lost spark ?

 

[d_moss]

Yes you can see it happen in my last video couple posts up. It's at the end when it happened obviously lol

Sent from my HTC One using Tapatalk