Freestyle Bun hull build (maxx hull)

[j0hnny]

god thats a pretty hull

 

[durhamgoat]

god thats a pretty hull

Fixed it for you...

God, that's a pretty hull, can I please have one?

 

[Pablo]

Some progress today watcon hood seal is mounted.
View attachment 262452
Only problem it seemes pretty big and hood sites realy high now, does some one know if it Can bee cranked down with a racet strap ?
View attachment 262453
Also Got the pole/hood hookes/and loocking system on
View attachment 262454
Couple off guys here have asked about B pipe setup, dont think its possibel with a stock waterbox.
View attachment 262455
Maybe it Can ve used in the PFP waterbox position.

Stefan,

I used a Watcon on my Freak build and it made the hood setup high as well. Either ratchet strap it down for a day or cut a vertical groove along the entire length of the hood seal so that the hood lip can set down into the hood seal foam. I cut mine and it worked well for 2 years.

 

[MikeyB]

Stefan,

I used a Watcon on my Freak build and it made the hood setup high as well. Either ratchet strap it down for a day or cut a vertical groove along the entire length of the hood seal so that the hood lip can set down into the hood seal foam. I cut mine and it worked well for 2 years.

I had the same problem with the watcon seal, I ended up tossing it in favor of an oem.


Sent from my iPhone using Tapatalk

 

[fx1dan]

hood on my revolver sits up high like that but ive had no issues

 

[SmittySX]

I think I'm going to kick myself for not buying one of these.. Looks good!

 

[freistiler]

Stefan,
you must ratched straped down your hood for 1-2 days.Than it works well.
The other Thing is your Pole is too long.You must cut them minimum 10cm.
Chris

 

[orangefinger]

Idont think it needes breather tubes, if you look att it takes in air att the back. Any water intrution will have too run up hill.

Yes I was just confirming that they don't need them anymore , with breather tubes in pole and the way the liner is made u should be fine even with 1200, just looking at the new way hood liners are made that's all I was just curious........

 

[fx1dan]

+1 on the pole length, its looks far to long, the hull will just want to tail stand and your think what the fu*k have I bought here

 

[stefan]

I will a just the pole when the ski gettes of the beach toto, and i Can stand in the forholds.

 

[Fx1boy]

Watching your build with great interest. Looks like it's going good. I've ordered same hull but went for orange.

 

[stefan]

Watching your build with great interest. Looks like it's going good. I've ordered same hull but went for orange.

Cool you got a pool and pump deal ? Where a you located ?

 

[Fx1boy]

To good of a deal if you wanted to get into Freestyle. I researched it for two weeks, a couple of sleepless nights and browed the money against the house and sent it. It's exiting times a head for us.

 

[stefan]

Got a bit more done ATP steering is on, and it fits the Titan pole nicely. Painted it black too goe with the pole, have ordered a Bun chin pad for it suede bee here here next week. Also got the pump together, whent smotly, thanks @Christian_83 for Press support.

 

[jetpilot36]

That's a nice pump

 

[naticen]

I thought suede bee was going to be the material and design on the chinpad at first. That'd be something else for sure.

 

[scottie mac]

Ski looks great, but those veins on that pump are SUPER thick. Is that the Maxx pump?

SM

 

[stefan]

Ski looks great, but those veins on that pump are SUPER thick. Is that the Maxx pump?

SM

Yes it is veines a sharpende, too help flow.

 

[Christian_83]

NP @stefan, always
The MAXX pump looked like a really nice piece of work. And was lighter than i thought. We should weigh it @stefan. I Think its lighter than the Solas 144 MAG stator?

 

[Fx1boy]

Pump thoughts. Would you agree or disagree that a larger diameter pump gives you a wider range of water flow over a smaller pump, much like a wide ratio gearbox to a close ratio gearbox. Next what about larger diameter hub 83mm. Would this be helping compress the air out of the water in the pump when doing multiple tricks when landing in your own dirty water. Downside bigger hub more load on the engine, restrict water flow? Thoughts?