oldskoo
local jackass
- Location
- Cleveland Ohio
perty boat! get that thing done dj seaons here!!!
Djkorn1's Trinity EVO Freeride Build
- Thread starter djkorn1
- Start date
dude you had better get ordering!!!
- Location
- Cleveland Ohio
I ordered my arse off yesterday... Just need the steering system...Nobody answered so I think I'll get a Bruins system!
and the Dakine Strap
Now I have to get wrenching!!!!
and the Dakine Strap
Now I have to get wrenching!!!!
- Location
- Cleveland Ohio
Updates:
* Hull should ship next Monday.
* Bruins Black Steering system on the way
* Pistons should be here tomorrow so I can get the cyllinder bored with the pistons.
* Abe 'North Graphics' sent me some graphics ideas (stoked)!
* New White/Green ODIs are here! (Pimp)
* Crank is here
* SBT remanufactured impeller is here...(stocker Solas Swirl $24!!!)
.....I just hope the paint goes quickly!
* Hull should ship next Monday.
* Bruins Black Steering system on the way
* Pistons should be here tomorrow so I can get the cyllinder bored with the pistons.
* Abe 'North Graphics' sent me some graphics ideas (stoked)!
* New White/Green ODIs are here! (Pimp)
* Crank is here
* SBT remanufactured impeller is here...(stocker Solas Swirl $24!!!)
.....I just hope the paint goes quickly!
Last edited:
cookerq62
Life's Been Good
- Location
- Upper Bucks, PA
I couldn't believe that either when we sent them a GTI impeller that was totally destroyed and we got one that looked brand new for $24! I can't wait to see this build done the paint should be sick.
SXR-FOREVER
Finally Flippin
- Location
- Lake Minnetonka, MN
hey DJ - I dont know if its too late but I would get the skattrak heavy duty steering cable! That thing is meaty as hell and will probably NEVER come close to thinking about wanting to maybe break. After breaking 3 stock cables I'll never run another one..
SXR-FOREVER
Finally Flippin
- Location
- Lake Minnetonka, MN
they were with red and sealant! dick.
LOL just ribbin' yah, but seriously, make sure your hood is strapped down tight :jester:
SXR-FOREVER
Finally Flippin
- Location
- Lake Minnetonka, MN
that was just a bad weekend:banghead:
DJ I hope your first weekend of riding will be better than mine was..
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
sounds like a good story. spill it!
- Location
- Cleveland Ohio
Did she go down like a whale turd??? lolol
Thats what happened to my SXR at the buildoff in Lanier in 2006...The headpipe bolts stripped and she sank like a tank. Beautiful ski full of Georgia mud!
Thats what happened to my SXR at the buildoff in Lanier in 2006...The headpipe bolts stripped and she sank like a tank. Beautiful ski full of Georgia mud!
Last edited:
- Location
- Cleveland Ohio
Bobby, any update pics? Lets get that baby out here!
Trinity Composites
Lightweight Evolution
- Location
- Palm Bay, FL
Had a little set back from the welder who tigs the exhaust tube for me. Its done and moving along. Closing the upper and lower tomorrow. Button up the loose ends and should ship thurs.
- Location
- Cleveland Ohio
STOKED!!!! Thanks for the pics, Bobby!
- Location
- Cleveland Ohio
Took my motor apart today...it had some serious deto on both cyllinders...I knew I had an air leak from the broken girdle stud...
No biggie, I was going to rebuild anyway! Cyllinder is fine and so are the rings and crank.
Either way, it 's getting a full rebuild and bore. :highhorse:
- Location
- New York Crew
Looks good man, I cant wait to see that in person!!!!!
Idok
F1pro
- Location
- Nations oldest muthaF+++kin city
forget the dakine strap...put on a pancake pete front hold SXR style...
SOOOOOOOOOOOOOOOOO much better than the strap....and I LOVE my straps!!!!!
SOOOOOOOOOOOOOOOOO much better than the strap....and I LOVE my straps!!!!!
- Location
- Cleveland OH
Are you going with the 85mm 850cc big bore?