McB.O.B.

McDog

Other Administrator
Staff member
Location
South Florida
Let me get McBOB and my wife's pink SN running first. The SN's top end is at Paul's getting bored and I have a new crank on the way for it too. Detonation was not good to it.
 

Waternut

Customizing addict
Location
Macon, GA
Eastern Jacksonville is about 4.5 hours from Macon, GA. My brother lives over in that area. Just make sure you gas up before you hit FL...or at least before you hit I-10 since there's nothing on I-10.
 

McDog

Other Administrator
Staff member
Location
South Florida
Worked all day. Hands bloody. I'm tired of having to grind on stuff.

McComing together!
 

Attachments

  • DSC00080.jpg
    DSC00080.jpg
    63.4 KB · Views: 78
  • DSC00082.jpg
    DSC00082.jpg
    57.9 KB · Views: 88
  • DSC00084.jpg
    DSC00084.jpg
    30.2 KB · Views: 68
  • DSC00086.jpg
    DSC00086.jpg
    72.2 KB · Views: 101
  • DSC00083.jpg
    DSC00083.jpg
    78.4 KB · Views: 104
  • DSC00087.jpg
    DSC00087.jpg
    63.2 KB · Views: 110
  • DSC00081.jpg
    DSC00081.jpg
    58.4 KB · Views: 122
  • DSC00085.jpg
    DSC00085.jpg
    44.1 KB · Views: 67

Sanoman

AbouttoKrash
Location
NE Tenn
l see you got that ride plate clamped down well! Did you just pour some epoxy in and clamp down?

McBob is coming together well.Looks great!
 

McDog

Other Administrator
Staff member
Location
South Florida
McRiding today.......

I just have to finish wiring, installing, and mounting the total loss; run the cooling lines; and install the gas tank.

I will need some prayers that the brain GIL graciously sold me pending payment until it works, actually works. I really want to paypal you your money today GIL! I'm headed to church to talk to the big guy about it this morning. Gotta cover all the bases.
 

Attachments

  • DSC00090.jpg
    DSC00090.jpg
    68 KB · Views: 55
  • DSC00092.jpg
    DSC00092.jpg
    64.3 KB · Views: 62
  • DSC00088.jpg
    DSC00088.jpg
    52.8 KB · Views: 37
  • DSC00093.jpg
    DSC00093.jpg
    66.7 KB · Views: 50
  • DSC00089.jpg
    DSC00089.jpg
    82.9 KB · Views: 76

GIL

Power In The Hands Of Few
Location
Cullman AL
McRiding today.......

I just have to finish wiring, installing, and mounting the total loss; run the cooling lines; and install the gas tank.

I will need some prayers that the brain GIL graciously sold me pending payment until it works, actually works. I really want to paypal you your money today GIL! I'm headed to church to talk to the big guy about it this morning. Gotta cover all the bases.

Having GOD on your side is ALWAYS the smartest way!!! I hope the test ride goes well !!! You have to be super excited!!!
 

McDog

Other Administrator
Staff member
Location
South Florida
Sorry GIL, no spark from the brain. I tried every way to diagnose it possible. I think it sparked one time during a test but it may have been my imagination. It wouldn't do it again. The only thing on the wiring I wasn't sure about was the black and white wires from the start stop switch. On the single channel systems you splice them in with the pickup wires, but on the dual channel it looks like you splice them together and they go to the pink wire. If I did it wrong somebody please tell me. The only other options were to splice it into the on off switch, or to run one of the wires to ground. The ski would turn over so I think I did it right.

DNR came and put on my HIN today so at least something got done.

If someone has a multichannel brain for sale pm me tonight. Otherwise I'm buying a new one tomorrow.
 
Top Bottom