Freestyle Power Factor Pipe Myth

[DAG]

Are you guys using an adapter plate when bolting the PFP to a DASA PV cylinder? Mine is defiantly not going to fit

 

[Matt_E]

Why not

 

[DAG]

Every hole is offset. A 1/2" spacer plate would help clear the PV's

 

[Matt_E]

Weird

 

[Billybo455]

I pm'd you about this.

 

[Superjetjim]

Mine went straight onto my DASA cast cylinder.

 

[DAG]

Riva Mani offsets from the top of the casting to top of the thru holes about .135. This mani tapers from .160 to .285 :aargh4: Going to be a long day with the angle grinder

 

[LegDragger64]

Looks like top of manifold needs to be machined to allow it come come up to correct height . Is that what im seeing ? Or is it a bolt hole spacing issue ?

 

[LegDragger64]

Five minutes with a grinder .

 

[Billybo455]

Get a sanding flapper wheel. Takes just a couple of minutes. I've seriously done about 10 now on dasa cylinders.

 

[DAG]

Yup, took a couple minutes

 

[Twinturbostang]

Are you guys using an adapter plate when bolting the PFP to a DASA PV cylinder? Mine is defiantly not going to fit

The Kawi based Dasa are the only ones that need a plate.
http://raddudesfi.com/raddudesfi.com/Part_-_Power_Factor_Pipe_Conversion_Plate.html

 

[tensecrnr]

i have a friend that is thinking of buy this power pipe...he has a stock 701...with taper bored 38,s... what do u think the pipe will do on his ski???

 

[MileHighJSC]

PFP seems to be great on every motor it has been run on. Definitely put it on the stock 701. If it does not work great I'm sure that you will have no problem selling a PFP on here.

 

[NVJAY775]

Just ordered one for my 771 and and can't wait to try it out. Need a hull first though lmao!

 

[tensecrnr]

PFP seems to be great on every motor it has been run on. Definitely put it on the stock 701. If it does not work great I'm sure that you will have no problem selling a PFP on here.

awesome thanks me friend is coming over today to get his ski,s out of my garage togo ride ill let him know...plus i wanna feel the power difference...ans see if on a semi stock engine its worth it...lol since i dont have money to burn...

 

[Frosty]

I'm installing my PFP this week. looking at the water routing drawing in the instructions, it says the "T" fitting is not used with the power box. how would you use the "T" with the resonator?

I'm planning to run without my power box until I get the gas tank/battery box combo I want... and plan to run the battery in the stock location, with a smaller tank for a short time... just so i can ride.

thanks

nevermind... I figured it out...

 

[GIL]

So will a 4 gallon tank work in a OEM round nose hull? (I'm helping a friend set one up)

Next dumb question-seems like there would be alot of room behind the exhaust manifold for the battery-good idea? bad idea?

Would love to do a 4 gallon Jaz tank and install battery between tank and timing cover............

 

[chadman154]

My battery is installed between chamber and jaz tank in my freak

 

[Matt_E]

Mine is sitting between exhaust manifold and firewall