Super Jet Starting at 'Square' One
- Thread starter TontoM3
- Start date
Droste14
Be About It!
- Location
- Wichita, KS
TontoM3
Manager of Gnar Shredding activities
- Location
- Lake of the Ozarks, Missouri
I'm going to pretend you didn't say that and then be really surprised when it's rusty. lol
I have dinner plans here in 30 so I'll have to continue the tear down later tonight.
I have also realized that I have only taken a 2 hour nap between 6am Wednesday and right now. might need some coffee but damn I'm dedicated!
alright well in most cases... lol
Droste14
Be About It!
- Location
- Wichita, KS
TontoM3
Manager of Gnar Shredding activities
- Location
- Lake of the Ozarks, Missouri
silver lining in the whole thing!
TontoM3
Manager of Gnar Shredding activities
- Location
- Lake of the Ozarks, Missouri
I was going to need the girdle kit anyways...
TontoM3
Manager of Gnar Shredding activities
- Location
- Lake of the Ozarks, Missouri
I just got home. kinda drunk, so this should be good. motor tear down starts now!
- Location
- Washington
Pretty sure a guy put a dasa 1000 in a chopped up SN....calls it the air square or something.
makejetskiinggreatagain
Brandon
ha ha air square. that's awesome.
TontoM3
Manager of Gnar Shredding activities
- Location
- Lake of the Ozarks, Missouri
So yeah there is water in the engine. But nothing is rusty because it's mixed with oil, so it has like a slime in places. Anyone ever see this? Also that head is brand new it doesn't even have a water spot in the water jacket.
So what comp is 35cc in a Yamaha? Also here is the engine spec
Someone tell me what in working with
So what comp is 35cc in a Yamaha? Also here is the engine spec
Someone tell me what in working with
TontoM3
Manager of Gnar Shredding activities
- Location
- Lake of the Ozarks, Missouri
Gracias! I do t really know what compression ratio is yet but I am at 650 above sea level so what octane usually doEs that require?
Yeah I'm not using the crank, that's a rookie move. How would You go about cleaning the cases? My plan was to clean as well as possible and then spray some oil on it to keep it from surface rust.
Yeah I'm not using the crank, that's a rookie move. How would You go about cleaning the cases? My plan was to clean as well as possible and then spray some oil on it to keep it from surface rust.
- Location
- Washington
35cc is fine for pump, guys run pump gas up to 200psi
Last edited:
you should get around 170-180psi, and running 91 octane will be fine. if your over 190psi, 93+ is required. that head is brand new for sure!
for the cases i use a razor blade to clean the surfaces and brake cleaner to clean the actual cases inside and out. a spray of WD 40 will keep them clean but if they are indoors they wont corrode.
grab a jetmaniac crank. they are like $200 for a rebuilt brand new bearing crank. id also suggest him for seals. run only OEM crank seals
Last edited:
- Location
- Washington
grab a jetmaniac crank. they are like $200 for a rebuilt brand new bearing crank. id also suggest him for seals. run only OEM crank seals[/QUOTE]
JM crank is $249 shipped and it's a $35 credit if you send him your old one I believe. JM is your go to parts guy for sure for everything you will need to rebuild that bad boy!
JM crank is $249 shipped and it's a $35 credit if you send him your old one I believe. JM is your go to parts guy for sure for everything you will need to rebuild that bad boy!
TontoM3
Manager of Gnar Shredding activities
- Location
- Lake of the Ozarks, Missouri
Awesome thanks guys. I'll be hitting up jet maniac for some goodies that's for sure. Reeds and cages looked new almost which was weird. Haven't opened the carbs yet but I'm assuming more of the same. I opened the stator cover and that was time capsule clean in there.
hold the reeds up to a light and look from the inside. if you see light, grab a new set to be safe.
my correction on the cranks, they are 249, 290 to us canadians. JetManiac was fast and on time with my order. something some people need to work on! Id buy from him again any time.
whats your pump plans?
my correction on the cranks, they are 249, 290 to us canadians. JetManiac was fast and on time with my order. something some people need to work on! Id buy from him again any time.
whats your pump plans?