- Location
- Central FL
Custom/Hybrid SUPERFREAK talk
- Thread starter JetManiac
- Start date
Mine is Superfreak V 1.0, but front pole bracket area is the same and I think that mine is 4" forward. Superfreak V 3.0 is 5" forward I think. Go for it, forward is good, but just remember to think about the nosepiece height/clearance in the area where you want to mount. Tem moved his bracket forward on one of his personal hulls.
I thought Mcdog's freak is v 1.0 or 1.5 and yours was 2.0 with mine being the same or 2.5 and the newest would be 3.0.
- Location
- South Florida
I'm so confused on the version numbering now that I just removed it from my thread title. Tem will have to chime in on this one to set it straight.
LOL, it seems that every superfreak is unique and different, that is part of their appeal to me. Handmade not factory assembly line produced. I don't know about the version numbering, if there is one. I was just following gregg's lead. I would consider McDogs V 0.5 because it was made before I met Tem. I consider mine 1.0 because it was the first hull made after Tem and I met. He starting riding and started superfreak then.
Last edited:
Buckwild12
I'm moved by DASA power!
- Location
- Chester, Maryland
I really can't wait, I got my paint guy lined up. most of the parts are here, one or 2 more odds and ends to get. My turf looks sick! I can't to get started! Is the new ride plate good to go Tem? I know it was still in development when last I talked to you. If so I want to get one!
- Location
- South Florida
I was thinking the hulls made for x-metal were 1.0 but since they were not called Superfreaks it makes since for them not to count.
x2
- Location
- Stevensville, MD
Has anyone installed a stock tank in one of these hulls yet? I run a sectioned Raider chamber that wraps around the front of the engine and I'm wondering if there will be enough room to continue to run this pipe or if I'll need to go to the SJ chamber. I measured and I need about 2" from the front of the flywheel cover to the tank, or about 4" from the front of the case to the tank. If anyone has a picture or is mocked up and could measure I would appreciate it.
- Location
- Stevensville, MD
I'm sure I'm quite a few weeks behind you, I'm just trying to figure out what parts I need to come up with. I want to be ready to bolt everything in and go when it gets here.
- Location
- Stevensville, MD
Appreciate it. Worst case is Buckwild should have his and I can run over and check it out.
Well, my hull should either have shipped this past Friday, or it will ship Monday or Tuesday.
I'd really like to do a mockup of parts before painting. That way I can concentrate on just installing parts instead of fitting them, when it's done being painted & turfed.
I'd really like to do a mockup of parts before painting. That way I can concentrate on just installing parts instead of fitting them, when it's done being painted & turfed.
Buckwild12
I'm moved by DASA power!
- Location
- Chester, Maryland
I am soo jealous! I wish mine was on the way already! I got an awful lot done on my pile of parts this weekend though, worked a good bit with my buddy on his ROK build too. Quite the productive midwinter ski wrenching weekend.
- Location
- Grand Rapids, MI
I got word from Tem: my freak is sitting at the shipping terminal and should arrive at the Blowsion shop early next week. I won't make it over there until Friday after next, though.
Wooooot wooooooot! So cool.
If you don't have time to go get it, you could just ship it to Michigan and I would be happy to start working on it for you.
- Location
- Stevensville, MD
I got word from Tem: my freak is sitting at the shipping terminal and should arrive at the Blowsion shop early next week. I won't make it over there until Friday after next, though.
I hate you.
Haha, congrats. Looking forward to the build thread.
- Location
- South Florida
Only run 8 miles every other day. LOL