Super Jet The why would you build a sn?

jeastes1

jeastes1

Location
clark lake, MI
dbattersby20 said:
you may have just inspired me to do something similar or at least something with a sn. You got a final weight on the hull? I wanted to do some major glass work on either a kawi 650sx, 300sx, or a square nose. Wanted something for rec/freestyle that would be short and custom. 650 is obviously a super cheap hull to get my hands on, but wasn't sure if a sn would be a better platform to start with, it'll cost an extra thousand though to get a sn by me compared to a 650.
Click to expand...

I still need to get the final weight, it was just under 110 lbs just hull, but that was with everything finished exept the tray. If it was me I wouldnt mess around with a kaw, ask almost anyone and you will get the same answer.
 
jeastes1

jeastes1

Location
clark lake, MI
tipafew said:
One of the sickest builds I have ever seen on the X
Click to expand...

Thanks man, hope it will be the crutch I need to step up my riding, cuz I here thats the only reason for making changes to a boat or buying an AM boat, just a crutch. I rode with you guys a couple times at sheldon, I had the black and green rn and the wetsuit straight out of 1994. Cant wait to see your freak in person, thats my dream ski!
 
dbattersby20

dbattersby20

Location
New Jersey
If it was me I wouldnt mess around with a kaw, ask almost anyone and you will get the same answer
Click to expand...
It would hardly be a kawi though. it would have yami or possibly sxr pump with matching tunnel/cavity, yami powered, a/m handpole, completely chopped hull. i would start with a sn sj like you but it's gonna cost an extra 1000 to get the hull, i feel like it might be better to put that thousand into the powerplant or pump.
 
S

Schmidty721

someone turf my rails
Location
WI
dbattersby20 said:
It would hardly be a kawi though. it would have yami or possibly sxr pump with matching tunnel/cavity, yami powered, a/m handpole, completely chopped hull. i would start with a sn sj like you but it's gonna cost an extra 1000 to get the hull, i feel like it might be better to put that thousand into the powerplant or pump.
Click to expand...

Bare SN hulls can be had for less than $200. I Mint RN hull barely brings 1k anymore
 
jeastes1

jeastes1

Location
clark lake, MI
dbattersby20 said:
It would hardly be a kawi though. it would have yami or possibly sxr pump with matching tunnel/cavity, yami powered, a/m handpole, completely chopped hull. i would start with a sn sj like you but it's gonna cost an extra 1000 to get the hull, i feel like it might be better to put that tthousand into the powerplant or pump.
Click to expand...

I payed 100 dollars for this hull, hood, pole, pump shoe and midshaft bearing, and I dont have to try and figure out where to put everything inside, thats why I went this way. It was more than enough work doing all that I did, couldnt imagine only being half way done now!
 
You must log in or register to reply here.
Top Bottom