Newbieski6585
LKN REPRESENT!!
- Location
- Denver/LKN, NC
Pics would be great:Banane01: :biggthumpup:
S
sunny_az
Guest
I finally rode one...what a nice boat. I was all over the map trying to force/drive it in the beginning, then as I relaxed and enjoyed the ride all I had to do was hang on and not over-correct.
Are you using straps to stay on inverted or just friction&bars?
Are you using straps to stay on inverted or just friction&bars?
ROTATION
Why must I build it??????
- Location
- South Africa
Just need to finish pipes to bypasses then will take pics.
Backflips will be soon, was practising off 1ft swell the other day, naturally was landing totally upside-down.
Using foot-straps
Backflips will be soon, was practising off 1ft swell the other day, naturally was landing totally upside-down.
Using foot-straps
ROTATION
Why must I build it??????
- Location
- South Africa
dbrutherford
Parts Whore
- Location
- Fairmont, WV
Looks good! Keep us informed!
DBR
DBR
ROTATION
Why must I build it??????
- Location
- South Africa
Legdragger
Bringing it back
- Location
- New Hampshire
What are you running for compression?
ROTATION
Why must I build it??????
- Location
- South Africa
30cc domes.
48 Novis and 16/21 Skat coming soon
48 Novis and 16/21 Skat coming soon
Legdragger
Bringing it back
- Location
- New Hampshire
What does that give you for PSI? I have 29cc domes but my squish is wacky right now and it only gives me 140#'s After the cylinder is decked I want to be at 180#'s.
Do the Novi's wake it up a lot?
I have a single stock 46 mikuni on my 820 and it runs so good and gets such great gas mileage I really hate to mess with it.
I do have Delta V Force reeds though.
Do the Novi's wake it up a lot?
I have a single stock 46 mikuni on my 820 and it runs so good and gets such great gas mileage I really hate to mess with it.
I do have Delta V Force reeds though.
ROTATION
Why must I build it??????
- Location
- South Africa
Haven't measured PSI, when I work compression out I use '4-stroke' compression ratio. it is now set for 95oct(RON), highest we can get at our pumps.
Getting the Novi's from Dustin Motzouris, he swears they have great bottom end even on his race ski, I know gas mileage will be a problem but this is a all-out freestyle ski. Allthe Japanese sites are selling DASA or similar 49's, the Novi's are the closest I can get.
Getting the Novi's from Dustin Motzouris, he swears they have great bottom end even on his race ski, I know gas mileage will be a problem but this is a all-out freestyle ski. Allthe Japanese sites are selling DASA or similar 49's, the Novi's are the closest I can get.
S
sunny_az
Guest
How'd you get that pipe in there? Any mods to make it fit?
ROTATION
Why must I build it??????
- Location
- South Africa
Bolts straight in.
oxnard111
Creative RE Purchasing
- Location
- so Cali, Ventura/Oxnard area
Lucky
S
sunny_az
Guest
flip!
flip!
flip!
flip!
flip!
ROTATION
Why must I build it??????
- Location
- South Africa
Fitting new carbs first and there has been no waves for ages.
ROTATION
Why must I build it??????
- Location
- South Africa
Tried some Novi 48's.
8210rpm on the lake(13/18 Skat swirl-impeller)
8210rpm on the lake(13/18 Skat swirl-impeller)
S
sunny_az
Guest
You have any freighters or shrimp boats giving off big wakes?
Hopefully your spring winds will blow soon...it's a bit cold down there now, eh?
Hopefully your spring winds will blow soon...it's a bit cold down there now, eh?
ROTATION
Why must I build it??????
- Location
- South Africa
Not too bad, around 70, going to be 59 this weekend but there should be big swell
ROTATION
Why must I build it??????
- Location
- South Africa
Running 44's now, had to set pop-off to 40psi to get clean idle at 1t LS. Jetting is 115-LS, 90-HS. The motor has strong signal for sure!:Banane01: